Hello there! We’ve shared a number of solutions to most common issues faced by the users using Windows 10 on this site. But sometimes, users keep searching the solution and they are still not able to get it. So we have created this page, so that you get directly to the solution you’re looking for. In order to fix issues in Windows, you should perform basic troubleshooting steps first:
Try the SFC /SCANNOW command in administrative Command Prompt and reboot. Click to read steps.
If possible, use the System Restore to restore system to last good configuration. Click to read the guide.
Verify if the issue exists while you’re in Safe Mode or not. Click to learn how to boot into Safe Mode.
If you’re experiencing Windows App related issue, try to create another user account and see if problem exists
If you’re still facing issue, drop the comment below with relevant description of the problem and we’ll be happy to help you!
419 Comments
Add your comment
^^ Older comments removed from this page to avoid database overhead!
Maybe you can help me. I’am having troubles with my wife’s machine I just updated to 10. It’s not sharing on the network to only a windows 7 laptop. My other two PC’s are windows 10, they can see her but cant get in. They say winsock problems that wasn’t fixed. i’am not sure witch machine needs fixed, her’s or the other two. The other two 10s and 7 work just fine together, remote even works. Her’s I can get out ….Just cant get in……..So witch one is it and how do I fix it ………..I’ve tried many things I’ve seen I just cant get it fixed………………Thanks
^^ Have you tried steps mentioned here: https://www.kapilarya.com/windows-sockets-registry-entries-required-for-network-connectivity-is-missing
Hi ……..Well I tried the fix you mentioned on my wife’s machine ………… Everything worked ok till I manually tried to install Internet Protocol (TCP/IP) tunnel ……… It gave me a error ……. Could not add the requested feature. It was Blocked by Group Policy……….. So I could still use your help Please……… And thanks for your quick response.
^^ Have you tried suggestions mentioned there in comments? Do try them and see if they helps :)
Upgraded to win 10 from 7 Home Ultimate. When I boot up, it no longer recognizes my Seagate Go Flex Backup 2TB USB 3.0 drive. But if I unplug the drive and plug it back in, it recognizes it fine. In the device manager I see the yellow triangle and get the error code 10 msg. When I open Properties it says the device is working properly, but it doesn’t show in File Explorer. Tried updating the driver, but it says my driver is up to date. Interestingly, if I unplug the USB cable or the power connector, I hear the tone telling me I’ve unplugged, and then when I plug it back in the power light comes on, windows recognizes it. Any ideas?
^^ Suggest you to uninstall third-party software installed if any, then run SFC scan:
https://www.kapilarya.com/how-to-use-system-file-checker-to-repair-windows
LAN problem: “one or more network protocols are missing on this computer. Could not add the requested feature. The error is: This program is blocked by group policy.” Group policy am not good at it. What am I looking for to enable internet protocols ? Specifically TCP/IP – Tunnels
Thanks for your help.
^^ Please go ahead with suggestions mentioned here in comments: https://www.kapilarya.com/windows-sockets-registry-entries-required-for-network-connectivity-is-missing
PLEASE HELP! I have reset my computer to restore it back to its original state. I have a n Acer Aspire with Windows 10. After taking 3 hours to reset the message came up “An operating system wasn’t found. Try disconnecting any drives that don’t contain an operating system. Press ctrl+alt+del to restart. I have read abd created a a boot able usb with windows 10, bc when I go to the setup menu and choose boot windows is not there period unless the usb is installed. ? Please help! How do I get Windows back and
get rid of this black screen? Thank you so much!
^^ See if this fix helps you: https://www.kapilarya.com/fix-operating-system-not-found-error-for-windows-10
Hi Kapil, upgraded to Windows 10 from 8.1 OEM. 10 uses lots of network bandwidth via OS updates and app updates. How can I lower the priority of system processes using internet. My own downloads, browsing are cornered and almost gets stuck. Even when windows update is off and no apps are being downloaded, svchost network service keep taking all the network bandwidth. I have to kill this process to free my bandwidth.
^^ You can reduce bandwidth consumption in this article: https://www.kapilarya.com/how-to-configure-reservable-bandwidth-in-windows. Let me know if you need further help regarding this :)
After having my Internet provider fix a problem we had due to high winds and the satellite pole being damaged my main computer is working fine, as long as it is plugged into the modem directly. Before, I had two computers running on the Internet Network through a router and they were working fine. Now when i try to connect to the Internet through the router, neither of the computers can connect. The message is ‘no Internet connection’. I tried changing the connector cord, but still same message. I can only use Internet if my computer is connected directly to the modem and not through the router. Any suggestions as to what I can do to fix this so that all the computers will access the Internet? When I ran a diagnostic the message was : ” one or more network protocols are missing on this computer” and another says ‘restore network protocols’, and another says windows socket registry entries required for network connectivity are missing.’
I don’t believe it really is these problems as others are having, as my main computer is working okay.
^^ Refer: https://www.kapilarya.com/windows-sockets-registry-entries-required-for-network-connectivity-is-missing
I just started using my Xbox One gamepad on Windows 10, which works fine so far. But there’s one Problem: As soon as I mix 360 and Xbox One controllers, the Xbox One controller is moved behind the 360 controllers.
So, I start with the Xbox One pad and everthing works as I expect it, but as soon as I connect one or more 360 pads, they are assigned before the Xbox One pad (e.g. if I use the Xbox One Controller and three 360 Controllers, the 360 controllers will be assigned to Slots 1-3 and the Xbox One pad is pad 4). The connection method has no influence on the behaviour, it occurs on both wired and wireless connetions.
Is there any way to avoid this? Or, a way to reassign them manually would be fine as well. I just want the Xbox One pad to stay the primary controller.
Hello Kapil, I have upgraded to Windows 10 on my desktop and laptop. On both I get Err-Connection_Timed_Out whilst loading some web pages – internet however is working on LAN and Wi-Fi. However whenever I try to connect to jazzfm.com/player/od/ ( this is a radioplayer for online radio stream ) it just loads and nothing happens. When I run the trouble shooter I get the Windows Sockets Registry Entries for Network Connection are missing. Don’t know what to do as I have tried the Forum mentioned fixes of ipconfig commands to reset etc. When I go into regedit and reach Nsi > 26 >Permissions > and Check Full Control for Everybody and then in Cmd ( Admin ) netsh int ip reset C:\resetLog.txt ( Restart ) I have manged to load the radioplayer and get it to play but only for a few minutes and then it just abruptly stops and I cannot reload. Also on reboot the Nsi 26 permissions gets UNCHECKED for Full control and I get stumped again. Please help !
^^ Please check this fix: https://www.kapilarya.com/windows-sockets-registry-entries-required-for-network-connectivity-is-missing
Hi,
I am having problems with VPN access. I can create a VPN through the VPN wizard, and it saves under my network adapters. However, underneath, it says unavailable- device missing and I cannot connect.
On further investigation, I found that the RASman & Routing & Remote access service fails to start. The SSTP dependency service runs fine, but RASman hangs on “Starting.” If I attempt to start manually, I get error 1053; The service failed to start in a timely manner. I think this is the main cause to my issues, but I’m not sure what I can do about it. Is there any way to reinstall the these services ?
Thanks
Environment: Lenovo ideapad S510p; Windows 10 Home Single Language; Intel i3
P.S.: I have tried sfc/scannow but there were no violations. When I tried system restore it gave an unspecified error (0x8007005), prompting to disable antivirus, although it was disabled.
^^ See if this helps you:
https://www.kapilarya.com/fix-system-restore-did-not-completed-successfully
Hi Kapil,
This is Jitin. Some guys worked on my uncle’s computer and damaged it. Now if I turn on the computer it shows me a lock sign with complete black screen and ask me to enter the password. And when I tried like 123/0000-1234-12345 it didn’t work. Is there any way to make it work or do I need to re-install the windows 7 again on the computer
Guide me please
^^ Obviously the passwords you’ve already tried won’t work. If you’re on Windows 10, try other sign-in options if available. In case you’re on Microsoft Account, try changing account password online and then enter the new password to device having issue. See if something helps!
Hi Kapil,
Hope you can help me on my issue.. i have windows server 2008 R2 data center version.. When i delete the any file/folder, its deleting permanently without going to recycle bin, even recycle bin properties are grayed out, it wont show the drives info, Please help me on this
Thanks for the reply!
No he has windows 7 on computer. He had windows 8.1 but he downgraded to windows 7.
Kindly help me with that.
Regards,
Jitin Vashisht
^^ So you don’t know the actual password, right? Well in that case, the only way to sort is to reinstall the OS. You need to believe that you’ll loose the data existing on machine. Alternatively, if you contact those guys, they can provide share you what they did and how to get rid of this horrible situation!
Hi
I’m having trouble opening my photos since I’ve upgraded to windows 10. I get ‘element not found’. I cannot change the windows viewer which is TWINGU.
Please can you advise. Much appreciated.
Thanks
^^ Please refer: https://www.kapilarya.com/fix-windows-10-element-not-found-error
Hi Kapil! I have an issue with my girlfriend’s Lenovo Yoga 3-14. The 5ghz wifi seems to drop when too many tabs are running or when facebook is trying to load. I get the sockets error but the suggested fix on your site doesn’t fix the problem. If I disable and re-enable the wifi, it goes back to running but the error keeps happening when the wifi seems overloaded. So I switched to 2.4ghz wifi and the problem was fixed, but I still want to be able to use my 5ghz wifi for flawless internet. Can you help me out
^^ Please have a look at other suggestions mentioned there and see if something helps you :)
^^ Already have looked in the suggestions, nothing worked. :(
^^ Try uninstalling the network driver and reinstall it, see if makes any differences in situation.
Windows missing sockets went to command prompt typed netsh winsock reset and it says requested operation require elevation run as admin. Then c\users… Comes up but I don’t know what to Putin?it says cthe rest is not recognized as an internal or xternernal command operable program or batch file
^^ Please run Command Prompt as administrator i.e. right click Command Prompt and select Run as administrator.
Hi Kapil I am having the most unusual, and agrivating problem; with my computer. I have Internet connection, all of a sudden. My browers, they just stop working. Nothing! All that I have, is a white screen. I viewed your video, to down load first. Winsock and Winsock2 files, then uninstall my Winsock and Winsock2. Then merge, the new Winsock files. If I, did this. Would that clear up, this problem I am having permanently?
Thanks
^^ You’ve to do that in a single session. Delete Winsock entries, merge them and then reboot. That should have help.
hai Kapil i am having every time in windows 7 or 8.1 or 10 some time when i open any application that program not responding why ?
some times in excel or working time automatically closing why ? in my office i am facing problems.
^^ See is this helps you: https://www.kapilarya.com/microsoft-excel-2016-has-stopped-working-on-windows-10
I have a brand new Toshiba Laptop and I am running Windows 10 OS. I am having wi fi connection issues. I have gone to a few different blogging websites to look for answers. I even scheduled a phone call with Microsoft, and the instruction given was not sufficient. I have tried a few methods for this problem, and, none have worked. So, basically what is happening is that I can connect to the wi fi router (most of the time when I first start up, sometimes I can’t then either). But, the problem usually occurs after I start up. Within 5 minutes and sometimes up to an hour or two I may not have any problems; but eventually this problem(s) happen, and, they happen everyday and multiple times. So, I’ll be doing something in a window/tab and the connection bars will slowly drop and all of a sudden one of two things will happen:
1) I will still be connected to the router, but it will say (secured, not connected). Or:
2) I will be dropped completely. And, this is the worse, because when I am dropped completely I have a really hard time reconnecting. Sometimes, when this happens, I won’t even be able to find my router in the list of connection options.
So, when #1 happens, it’s really weird b/c when I try to run the trouble shooter, more often than not, before it finds an issue, I am reconnected and the T.S. will tell me that there is no problem. On those occasions that it does find a problem it will tell me a few things. A) problem with access point or network adapter. B) It will tell me ‘one or more protocols are missing on the computer. The B has only come up once or twice, rarely. The number one comes up most all the time when the troubleshooter finds something. What’s even more strange is when this problem occurs, I open another tab, try to open yahoo.com, go to the bottom right where you click to find your connection/router list and where you can go to network/sharing center/etc, then if my router is showing in the list, I’ll go up, click it a couple of time (I’m not connecting or disconnecting, I’m just clicking on it) and within seconds it goes from ‘secured/not connected’ to ‘secured/internet connected’
I am not sure my clicking on the router does anything but I just want you to know exactly what I see and do
So, when letter B happens it usually get’s so bad that I have to restart my computer in order for it to find my router again.
Of all my searching through various websites, I seemed to have found the trouble on the Toshiba website. Alot of the people are saying that there is a Problem with Qualcomm Atheros AR956x wireless network adapter that came with my laptop. Of course, there are lots of people giving answers there too. And, though I am pretty intelligent, some of the answers don’t even make sense to me. Or, the answers are so complex that I am afraid to try them because I am afraid of making the problem worse and/or creating a new problem.
Can you please help me?? I would really appreciate it. Thank you.
I found that Microsoft is forcing its users to upgrade to windows 10 and trying to take personal information after upgrading it, moreover Edge is one of the worst browsers I never ever had seen in my life, it could be rude to write this comment because of my personal and my clients experience, I am forced to showcast it. Edge gets many popups and fake scam websites after popup blocker is enabled, Worst customer experience and if anyone asks the rating for microsoft, it will be negative, Thank you for providing an opportunity for feedback, Vinod
Windows 10 went blank on me after trying to reset it. All I can get into now is command prompt. In trying to revert pending actions from the image, I got an error code 0x800f082f. How can I fix this in command prompt? Thanks Bob
^^ Though you got different error code, see if FIX 1 of this post helps you: https://www.kapilarya.com/dism-error-0x800f081f-the-source-files-could-not-be-found-windows-10
I ran chkdsk c: /r/x got Found no problems. No further action required. Below this was Failed to transfer logged messages to the event log with status 50. I then ran sfc /SCANNOW an got There is a system repair pending which requires reboot to complete. Could not reboot. I then ran Dism /Online /Cleanup-Image /RestoreHealth and got DISM does not support servicing windows PE with the /online option Error 50. I then tried running dism.exe /image : c : \ /cleanup-image /revertpendingactions and got The scratch directory size might be insufficient to preform this operation. This can cause unexpected behavior. Use the /ScratchDir option to point to a folder with sufficient scratch space. The recommended size is at least 1024MB. Reverting pending actions from the image.
Error 0x800f082f. Tried your fix for Error 0x800f081f and got Error 50 again.
^^ Odd, is there any System Restore points available on your machine? If yes, you may try restoring the system and see if it makes any differences in situation.
I have a HP Stream Labtop that came loaded with Windows 10. No restore points have been created. System Image Recovery says it can’t find a system image on this computer. Startup Repair says it couldn’t repair my PC. Startup Settings says your PC did not start correctly. Go Back TO Previous Build says we couldn’t find a previous build to go back to. Under UEFI Filmware Settings it has F1-system information, F2-system diagnostic, F9- boot drive options says OS boot manager (UEFI) – windows boot manager ( SDW32G), which is highlighted or Boot from EFI File. F10- BIOS Setup version F.18. The only thing I forgot to tell you was when I tried to restart my computer on one occupation a dark blue screen came up in the light blue screen and ask if I wanted to clear the TPM. it said if you were resetting your PC you should clear your TMP, so I did. I tried a fix for Error that I found at appuals.com , but I didn’t see my name under permissions in the MiniNT folder.
Windows 10 downloaded to our computer without our doing it.
Now the start menu doesn’t work
The printer doesn’t work. I’ve tried to update the drivers but the computer doesn’t recognize the printer – it works with my laptop.
I’ve tried some of the fixes for the start menu problem that I’ve been comfortable with except the registry one as that one seems too complicated for me.
help
^^ Multiple issues and seems like update is broken. You may go ahead with reinstalling Windows 10 without affecting your files: https://www.kapilarya.com/reinstall-windows-10-without-affecting-personal-files
Thanks, for trying to help.
I have windows 8.1 and my startup menu is missing tiles , my email & my Desktop tiles are gone i only need the two how can i get them back i really liked accessing both my emails in one place and i got a messige from windows that said they cant access my harddrive for some reason and i cant find anything wrong with my computer everything working grate.
^^ Try DISM commands and see if they helps:
https://www.kapilarya.com/fix-do-inbox-corruption-repair-using-dism-in-windows-8
https://www.kapilarya.com/how-to-fix-error-0xc000000f-the-boot-selection-failed-because-a-required-device-is-inaccessible
im facing this problem and when i try to adopt your method then nothing happened coz i got nothing on my screen but system information
i dont get a install window option or recovery option
what should i do
In trying to repair ( \Boot\BCD) following your directions on my computer….after typing Y to question Add installation to boot list?….The answer I received was: “The requested system device cannot be found.” and the computer goes back to X:\Sources> It previously had said: “Total identified Windows installations:1 [1] D:\Windows ” I need help to get my Dell XPS 8300 Service Tag: JTBM0R1 up and running again.
^^ Suggest you to retry these commands in same sequence:
BOOTREC /SCANOS
BOOTREC /FIXMBR
BOOTREC /FIXBOOT
BOOTREC /REBUILDBCD
Let me know if it works.
Dear Kapil, I am using windows 10 Pro, I want to update Windows 10 Anniversary update but failed every time. The downloading is completed every time but installation is not completed, I have tried everything here to no avail, and windows update troubleshooter says the missing or corrupt registry. Everything goes okay until I get to 76% on the install and it then auto finishes, and promptly restarts and restore my previous version, this has happened when trying to update i had tried alll your suggestions but dosent get a success. After doing this step sfc / scannow I just received this what i should do now?????
windows resource protection found corrupt files but was unable to fix some of them. Details are included in the CBS. Log windir\Logs\CBS\CBS.log. For example c:\windows\Logs\CBS\CBS\.log. Note that logging is currently not supported in offline servicing scenario.
Please do something.
^^ SFC scan results shows that your system has corrupted files, so run third DISM command mentioned here to fix them: https://www.kapilarya.com/fix-do-inbox-corruption-repair-using-dism-in-windows-8. Also, I suggest you to download Windows 10 ISO file containing Anniversary Update and upgrade using it. Get ISO from here: microsoft.com/en-in/software-download/windows10ISO
0x80070005 I got this error and my drive(c:) cannot access by me will you help me
^^ Try this:
Right Click C:\
Select Properties
Select the Security Tab
Click the Advanced Button
Click the Change Permissions
Click Add
Click Advanced
Click Find Now
Scroll through the list and find Authenticated Users (it may only say Authenticated)
Press OK
Press OK
Press OK
Press OK
Press OK
Now it should be working. Let me know if this helps!
Hi, Im using acer aspire E5-471. When i switch on my laptop, at the startup said preparing automatic updates then the blue screen appear recovery.
File:sls.sys
Error:0x0000185
I try all the f8 option but still the same. The blue screen appear again and again. What should i do? I have important document in the laptop.
Help me please
^^ Please perform Startup Repair: https://www.kapilarya.com/how-to-perform-automatic-or-startup-repair-in-windows-10
Hi there Kapil,
I’m desperate for a solution to the following problem. Airplane mode is enabled and it doesn’t turn off. I can’t connect my windows 10 desktop to the Internet. This happened after a mandatory update, which btw lost me work since Microsoft just forced my computer to restart. After this enraging experience , my wifi just stopped connecting and I can see the airplane mode button sometimes appearing and sometimes not.
I’ve tried your solution to find RadioEnable in the registry and change the values but that file is nowhere to be found.
I’ve tried rebooting in safe mode and the problem still persists.
I’ve tried system restore but I can’t turn the clock back since I haven’t enabled it before the force-fed updates. Finally, I’ve tried cursing at the screen which felt really good, but it didn’t help either.
I have had a lot of stupid windows problems in my life but this one takes the cake. It really just blows my mind. Can u please, for the love of God, help me out here?
^^ Since you tried all possible options, make a refresh to Windows 10 (without affecting your data): https://www.kapilarya.com/reinstall-windows-10-without-affecting-personal-files
Hi Kapil, my notebook win 10 got boot error MUI_NO_VALID_SYSTEM_LANGUAGE then recovery error code: 0xc0000001 after following win 8 steps on some other blog . I tried all bootrec options but bcd still not recovered, bcdedit failed. Any suggestion except clean install as I dun have the key.
Thanks.
^^ Try performing Startup Repair: https://www.kapilarya.com/how-to-perform-automatic-or-startup-repair-in-windows-10
Thanks for your suggestion but startup repair (I already tried before) can’t fix the issue.
Bluethooth gone missing after windows 10 update Nowhere found in laptop….. checked installing drivers from official website but drivers doesn’t show up in device manager
I upgraded from W7 to W10 and System Reserved partition was not created, instead it now has W7 Recovery partition as the active partition. How can I create a System Reserved partition and set it as the active partition. Thanks.
Hey, out of the blue my system i.e. Vaio with windows 10 got hang and when i tried to restart it with poer button, i keeg getting the command “Operating system not found”
I tried to recover it through so many post of yours..nothing works and when i go to BIOS, it show “None” hard disk.
I am worried so so much for my data as I don’t have any back up.
I really hope u could help me
^^ When you start your machine, kindly press the boot selection key (on my laptop its F9, it may be same or some other key on your laptop). Using the boot selection menu, select your hard disk and that should brought operating system. If not, try performing Startup Repair: https://www.kapilarya.com/how-to-perform-automatic-or-startup-repair-in-windows-10
Hi Kapil, thanks for helping all us amatures in restoring our windows PC!
My Win10 is not booting and I have followed few steps you mentioned in Command prompt and tried restoring the system. Unsuccessful.
System restore did not complete success. Your computer’s system files and settings were not changed.
Details: system restore failed to replace the file C:\program files(x86)\common files\microsoft shared\ink\tabtip32(1).exe with its original copy from restore point.
And unspecified error occurred during system restore. (0x80070780).
Can you guide and help me please? Thanks.
^^ What happens when you boot the machine? Do you see any error code/message? Which commands you’ve tried? Try restoring to some different restore point. Also check: https://www.kapilarya.com/fix-system-restore-did-not-completed-successfully
My windows 10 start menu stopped working. I tried the fixes (the best I can) and have not been successful. How can I do or is there a way someone from microsoft can walk me through a repair that works. thank you.
^^ Please let know what Start Menu troubleshooter reports in your case: https://www.kapilarya.com/download-start-menu-troubleshooter-for-windows-10
i was installed windows 10 professional 64bit in my new hp 450g3 laptop.While im running autocad 2013 “close programs to prevent information loss” your computer is low on memory save your files and close these programs error message coming. in my laptop 8gb RAM and 2GB Graphic card is there .I was changed Virtual memory settings also removed tick on automatically manage pagefiling and given customized options. Give me permanent solution for this problem.
thanking you sir.
^^ Please uninstall unnecessary software installed on your system and make sure you’ve lots of free space on your system root drive. If issue still persists, you can try refreshing Windows 10: https://www.kapilarya.com/reinstall-windows-10-without-affecting-personal-files
There is no unnecessary softwares,I was installed only MS Office2013,Autocad2013,Printer Drivers,Skype,Chrome,Adobe reader and necessary drivers like graphic,wifi,LAN. This problem comes from 1st day onwards.My laptop 10days old only.
Thank You Sir.
This the problem that always happens:
When I open my laptop it always says preparing automatic repair it doesn’t work but when I click continue to Windows 8 it brings me back to preparing automatic repair and it keeps going around a loop
If you see this comment please let me know how I can fix it
Thank you
A found a forum post from you giving good advice on Bitlocker issues. I recently screwed up my locked 1Tb DATA Drive E: by prematurely shutting down (hold down the PWR button) my laptop which rendered Drive E: inaccessible. also the Bitlocker Applet is missing so I’m force to use CMD. I researched and read before tinkering. I tried using the C:\>repair-bde E: F: -rp 665808-164791-199837… but at the end of the scan it basically told me:
“Please try a different recovery password, recovery key or password”.
See actual results:…
Scanning sector boundaries for metadata: 1%
LOG ERROR: 0xc0000033
Failed to authenticate using supplied recovery information. (0x80310027)
LOG ERROR: 0xc000003b
Could not validate metadata at offset 3156426752. (0x80310027)
LOG ERROR: 0xc0000033
Failed to authenticate using supplied recovery information. (0x80310027)
LOG ERROR: 0xc000003b
Could not validate metadata at offset 3156492288. (0x80310027)
LOG ERROR: 0xc0000033
Failed to authenticate using supplied recovery information. (0x80310027)
LOG ERROR: 0xc000003b
Could not validate metadata at offset 3156557824. (0x80310027)
Scanning sector boundaries for metadata: 100%
Finished scanning for BitLocker metadata.
-STATUS results
Volume E: [Label Unknown]
[Data Volume]
Size: Unknown GB
BitLocker Version: 2.0
Conversion Status: Unknown
Percentage Encrypted: Unknown%
Encryption Method: XTS-AES 128
Protection Status: Unknown
Lock Status: Locked
Identification Field: Unknown
Automatic Unlock: Disabled
Key Protectors:
Password
Numerical Password
I know its the right PW b/c I got it from my MS acct! I thought of doing the CMD -changepassword to create a complete new PW to replace the possibly fragmented existing PW that can’t be redeemed.
Other than that…Where do I go from here… suggestions and How To’s please and Thank you!
^^ In case of BitLocker, you need to use exact recovery key. If it’s not working, use the recovery password. If both doesn’t works, it is almost impossible to recover the encrypted data. But if you still want to use the drive, you can format it and gain the space.
Ok, so whats the difference between the “recovery key” and the “recovery password”?
Is the “password” the same as what I would NORMALY use in the “Bitlocker Dialogue Box” to unlock drive E after logging in to the PC?
… and therefore is the “recovery KEY” referring ONLY to that 48 digit string of numbers?
The reason I ask is b/c when I ran ” C:\>repair-bde E: F: -rp 665808…” I see that I used “-rp” (recoverypassword) BUT inserted the 48 number KEY vs my PASSWORD!
So could that be why at the end it says “Please try a different recovery password, recovery key, or password”? … b/c I used the KEY instead of the PW when “-rp” was the command… for some reason, I thought that terminology referenced the same thing, KEY & PW were the same.
battery not charging when p;ugged in and not showing anything but charging when shut down
thank you
I am using windows 8.1,now my admin account is not available in the welcome screen only standard user is there.I am currently logged in from my standard user account so I haven’t administrator privillages. For the trouble shooting I am not able to run cmd as administrator when I gave the password it shows “windows cannot find c:\windows\system32\cmd.exe”.I tried safe mode also,but admin is not available there.Now admin is only available in the option “use command prompt for advanced troubleshooting”.What should I do?
^^ Please check: https://www.kapilarya.com/fix-lost-administrative-rights-in-windows-10
Plz help me to solve 9666 proxy error connection in internet explorer I just follow your instructions inetcpl.cpl and reset the ie but still it did not work plz help me to resolve
hi sir while i download in you tube after my data gone out failed server unreachable at the end of stage will i able to resume my download please help me
In save from.net extension I downloaded the video later I clink on resume it shows it is server error forbidden plz help
windows cannot be installed to this disk. the selected disk is of GPT partition style how do i fix it without deleting important files that is therein while i am installing windows 8
^^ If you can, grab the important files by making a parallel install and then convert disk and go ahead with installation.
Help me please. I have problem with my pc. It says “errorcode : critical process died. I have tried using command prompt but failed.
Ahhhh I need help!!!! I went to do a full reset on my hp notebook with windows 10 and it got all the way to 99% then said it failed, an error came up and said “inaccessible boot device” then it kept restarting… Now my computer just keeps restarting with the hp symbol constantly! I’ve tried resetting through f11 and it goes so far and just says its unable to reset!
Any help is much appreciated, thank you!
^^ Please check: https://www.kapilarya.com/fix-inaccessible-boot-device-bsod-in-windows-10
Your pc could not start properly A required device is not connected or cant be access
Error 0xc00000f
You will need to use recovery code.
The above issue I am facing while starting my ASUS TRANSFORMER BOOK T200TA-DB11T-CA TOUCHSCREEN NOTEBOOK TABLET.
I dont know anything about PC’s software and also dont have money to spend to fix it. Any code or cd is not available with this as i purchased it from bidding company as is. Please help.
^^ Assuming you’re on Windows 10, download the ISO file free of cost from here: https://www.kapilarya.com/download-latest-windows-10-iso-files
Then go ahead with steps mentioned here: https://www.kapilarya.com/fix-windows-10-master-boot-record-corrupted
Hello Kapil, I have problem with connecting to EXISTING Homegroup on my x86 laptop with Windows 10 Fast Insider Builds on RS2 branch (now 15019). I can only create new homegroup on it. I have send a lot of feedbacks to Feddback Hub, but still no answer from MS. On other PC X64 with the same build EVERYTHING WORKS FINE! Other 3 PC on my Homegroup are on Win 10 RS1 and 1 with Win 7 Ultimate. I try al your fixes and registry tricks, but nothing help. Can you help me?
^^ Since the problem exists on Insider Preview build only, you can wait for next build and download it, hope it fix the issue 😊
Hello, is Windows Insider Preview still available for Lumia 520 ? I mean the latest version 15014…
Hello Kapil, this is the third time I am asking as the earlier two times my question went unanswered…Will the current insider preview come for Lumia 520 ?
^^ Sorry for delay in response but these days Microsoft doesn’t specifically mention for which model they’re releasing the build. Hence you need to check it manually and if any build doesn’t appears to you, wait for the next build and that is all you can do right now.
Ok fine and Thanks Kapil :)
My HP elitebook 8470p 64 bit Ram 8gb hdd 1 tb running windows 8.1 pro has been having freezing problems and programs not responding and sometimes closing in the middle of an operation. I think it has been infected by a virus although I have installed various antimalware softwares eg Malwarebytes, Super anti-malware, Emsisoft antimalware, Eset nod32 antivirus, Kasperky removal tool, Hitman pro among others but none of them seems to detect the problem. I used adwcleaner one time and after it had finished scanning it asked for a reboot to complete the cleanup process. I rebooted but after login a black screen appeared . I tried to press Ctrl+alt+del which opened up sometimes but when I pressed task manager the black screen with a movable cursor shows up again. I also tried to boot into safe mode by pressing shift+ restart on the login screen which worked very few times because often times it would just restart back to the login screen. Anyway while in safe mode I tried different solutions I googled such as SFC/scannow command, deleting the Windows activation folder, uninstalling the graphic card drivers, deleting the file: Windows.UI.Immersive.dll etc but none of the solutions worked.
After a while I came across this solution bootrec \fixmbr which I used and after reboot I pressed ctrl+alt+del and when I tried to open task manager the system opened up although it took around 5 minutes to load all the programs. I used it for a few hours although it would occasionally freeze and at one point it froze for about 10 minutes so I shut it down and when I started it the black screen error came back.
After multiple struggles to enter safe mode I tried another solution that was about deleting all the antivirus programs. Before this process could be completed my pc suddenly shutdown because I had not plugged in and battery had reached zero without my knowledge since while in safe mode there is no notification about the battery life. Anyway when I tried to boot my laptop it immediately went to Automatic repair but after scanning it said that automatic repair could not repair your PC so I pressed the advanced options.
I tried startup repair which failed.
I tried Refresh your pc which said There was a problem refreshing your pc. No changes were made.
I also tried System restore which gave me this error: ( System Restore did not complete successfully, Your computer’s system files and settings were not changed.
Details:
System Restore failed to extract the original copy of the directory from the restore point.
Source: %SystemRoot%\registration
Destination: ComPlusStaging
The restore point was damaged or was deleted during the restore.
You can try System Restore again and choose a different restore point,If you continue to see this error, you can try an advanced recovery method.)
I tried to get into safe mode through the startup settings but when I press f4 the automatic repair loop keeps on starting.
I decided to disable the automatic repair loop to see whether I would solve the problem which I did by using this command ( bcdedit /set {default} recoveryenabled No )
This brought me to a blue screen with this error:
(The operating system couldn’t be loaded because a critical system driver is missing or contain errors.
File:\WINDOWS\system32\DRIVERS\klelam.sys
Error code:0xc000000f
Choose one of the options below to address this problem.
Press ESC for recovery
Press Enter to try again
Press F8 for Startup Settings)
I have also inserted a windows 8.1 recovery disk and tried to install windows but after following all the instructions the final response is: ( The computer started using the Windows installation media. Remove the installation media and restart your computer so that Windows starts normally. Then, insert the installation media and restart the upgrade. [Do not select Custom advanced to perform an upgrade. Custom advanced installs a new copy of Windows and deletes your programs and settings.]
Please assist because I don’t want to lose my personal files but I have no problem if all the programs were removed. Thank you
Hello,
To install some application on my Windows 10 home edition, I had to activate built-in administrator user. Once done, I logged onto the account and changed the password. To my stupidity, I forgot the password. I shut down my laptop then. When I logged on back, I logged into my local user. But, when I tried to install something on my local (which had admin access earlier – before enabling built-in-administrator account), I am denied and is asking administrator password – which I do not remember. How do i proceed now??? Please help
store app in widows 10 not download apps I have tried all these fixes it still dos not work
Firstly, I have been working with MS community but so far to no avail, MS Edge crashed on start up after a major hydro outage, I was in middle of restarting computer when hydro went out, now I also cannot reinstall edge, I can’t access Feedback Hub or Windows store ..tried several of suggestions in the help area above and I am just about at the quitting point, don’t know where to turn next ..sure wish someone could help ..if you want or need remote access no problem.
^^ I believe you now need to re-register all apps at once. Check the guide here and follow step 1 & 5: https://www.kapilarya.com/re-register-start-menu-windows-10. You may also try creating a new user account and check if the apps work fine on that 😊
I tried the guide and it didn’t work and then created a new user and it still didn’t help ..
^^ Unfortunately, you need to Refresh Windows 10, this won’t affect your data: https://www.kapilarya.com/reinstall-windows-10-without-affecting-personal-files
Hi… My systems restarts continously after working for 1 or 2 hrs… Then it displays black screen for a long time and restarts again… changed motherboard… tried swapping ram… still issue persists… pls advice…
^^ Kindly perform Startup Repair, see if that helps you: https://www.kapilarya.com/how-to-perform-automatic-or-startup-repair-in-windows-10
I have tried every option in the Automatic recovery and none of them work. When I try to recover from a recovery disk, a USB drive, usI got the option, Recover from a Drive, I have tried both the Just Remove My Files and a Fully Clean the drive options. Either one has aborted the process between 41% and 98% complete and I get a message, There was a problem recovering your computer.
What do you suggest next?
^^ Try using Refresh tool, see if it helps you to recover the system: https://www.kapilarya.com/download-refresh-windows-tool-to-fix-resetting-problems
got the 101 initialization error and tried to restore, restore points have disappeared. I can’t seem to boot up in ANY mode and can only really do anyhting in Command prompt. The drive is still there, I can verify it. It mentions “CBS.log”, and I would need some help trying to get to that log to see if I can affect a solution. Otherwise, I really, REALLY need help
Hi there
im using win 10 and can´t acces the system settings to install windows updates … keeps getting the message
Runtime Error
Program C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe
i can however acess the control panel.
troubleshooter didnt find any errors
also Fixes that I have tried:
SFC /Scannow (no errors found)
System Restore
Tried the powershell Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml”} fix
Tried the DISM /Online /Cleanup-Image /RestoreHealth fix
Create a new user (problem persists)
please help
^^ Please refer following fix: https://www.kapilarya.com/this-application-has-requested-the-runtime-to-terminate-it-in-an-unusual-way-windows-10
tks.. but that didn´t work..
unistalled all versions … except 2005 (5 versions) and 2008 (4 versions) … couldn´t find newer versions.
even after reintall the others, the problem remains
update:
After manually install Windows 10 creator… everything is working now
^^ Glad the issue is sorted now 😊
Hello, im running Win10 Enterprise N 2015 LTSB and my Start Menu, Volume and Calendar windows wont show up anymore…
Right-click > Display Settings returns a messagebox with “This file does not have a program associated with it for performing this action…”
Basically none of the Metro Style UI is working anymore.
Ive fixed all issues that sfc reported, tried several know start menu fixes i found online including re-registering, witch is how i found this site but none seem to make any difference.
Clearing all the logs and rebooting reports only 4 errors in the Administrative Events log:
1. Event 10, AppReadiness: The Appx operation ‘RegisterPackageAsync’ on ‘Microsoft.XboxGameCallableUI_1000.10240.16384.0_neutral_neutral_cw5n1h2txyewy’ failed for user ‘Victor’ – Rejecting a request to register from AppxManifest.xml because the manifest is not in the package root.. (Error: Install failed. Please contact your software vendor.)
2. Event 214, AppReadiness: ‘Microsoft.XboxGameCallableUI_cw5n1h2txyewy’ install failed for Victor. Error: ‘Install failed. Please contact your software vendor.’ (0.6610054 seconds)
3. Event 10, AppReadiness: The Appx operation ‘RegisterPackageAsync’ on ‘Microsoft.XboxIdentityProvider_1000.10240.16384.0_neutral_neutral_cw5n1h2txyewy’ failed for user ‘Victor’ – Rejecting a request to register from AppxManifest.xml because the manifest is not in the package root.. (Error: Install failed. Please contact your software vendor.)
4. Event 214, AppReadiness: ‘Microsoft.XboxIdentityProvider_cw5n1h2txyewy’ install failed for Victor. Error: ‘Install failed. Please contact your software vendor.’ (0.665014 seconds)
I have a bunch of Hyper-V Machines and a lot of Dev Software setup and i do not want to reinstall everything, so im hoping you can help me track down the issue and fix it without a reset.
Im a seasoned admin and developer so don’t spare the technical details.
hello.
i cannot refresh my windows 8. it says ‘there was a problem refreshing your PC. Nochange were made’
i’ve been try this :
At the Command Prompt, i go to the \windows\system32\config folder by typing the following command: cd %windir%\system32\config.
Rename the System and Software registry hives to System.001 and Software.001 by using the following commands:
ren system system.001
ren software software.001
but when I tried to rename the Software.001 file the system responds:”The process cannot access the file because it is being used by another process”
can you / anyone help me?
Microsoft Visual C++ Runtime Library
Runtime error Program c:\windows\explorer.exe. this application has requested the runtime to terminate it in an unusual way. Logs says Faulting application name: explorer.exe Faulting module name: msvcrt.dll Faulting application path: C;\Windows\explorer.exe
I have tried installing visual c++ redistribute-able package. Replacing the msvcrt.dll file Run sfc scan and also dism restore health. Uses MS Office Products( Outlook,Excel, Access). System is Windows 10
^^ Try the in-place upgrade, see if it resolves the issue: https://www.kapilarya.com/how-to-repair-windows-10-using-in-place-upgrade
HI MY OTHER LABTOP WITH WINDOWS 10 CAN’T GET PASSED START-UP REPAIR CAN’T REPAIR YOUR PC. I can only use command prompt.
Hi When I boot my labtop with windows 10 -“RECOVERY” screen- your pc needs to be repaired, none of the advanced options work, and have 3 volumes besides C: listed as primary. command prompt is the only way I know. PLEASE HELP!
^^ Refer: https://www.kapilarya.com/fix-your-pc-did-not-start-correctly-in-windows-10
I INSTALLED THE LATEST BUILD FROM WINDOWS INSIDERS AND GOT A BLUE SCREEN WITH “YOUR PC NEEDS TO BE REPAIRED” WITH THE ERROR CODE 0XC0000225,AFTERWARDS I CANT DO ANYTHING NOT EVEN GET TROUBLESHOOT OPTIONS,CANT BOOT FROM ANYTHING BUT THATS ONLY ON UEFI,SO I CHANGED TO LEGACY AND I CAN BOOT UP FROM WINDOWS DVD INSTALLATION WINDOWS 10 PRO BUT WONT LET ME INSTALL ON ANY PARTITION AND I CAN GET TROUBLESHOOT OPTIONS BUT NOTHING WORKS,,ON UEFI A STRAIGHT BOOT COMES UP WITH CANT FIND BOOTABLE DEVICE,, I HAVE TRIED EVERYTHING,DISKPART,BCD/BOOT NOTHING WORKS,NOT EVEN MY USB RECOVERY..CAN U HELP ME OUT WITH THIS …THANK U
^^ Kindly refer: https://www.kapilarya.com/your-pc-needs-to-be-repaired-0xc0000225
last month my system was running fine. its a dell insperon 15 3537 or something similar and came with windows 8, but upgraded to windows 10 when it came out. in the beggining of may everything worked fine, but then windows updated and it hasnt been right sence. two subsuquint updates failed and i keep getting a “application has been blocked from accessing the graphics hardware” error when i try to play any games. ive deleted and resintalled the drivers, did a DISM scan (clean) and checked for malware using varius programs. i cant find anything relevant online, its all older and the fixess dont work for me.
^^ Please try: https://www.kapilarya.com/application-has-been-blocked-from-accessing-graphics-hardware-windows-10
Hi windows defender is not working in my computer.how can i turn it on??
^^ See if this fix helps you: https://www.kapilarya.com/this-app-is-turned-off-by-group-policy-windows-defender
Windows Spotlight not changing each day with my Windows 10 Pro. I tried all your fixes, including the Powershell fix, and problem persists. What next?
^^ Try resetting Windows Spotlight: https://www.kapilarya.com/how-to-re-register-windows-spotlight-in-windows-10
If issue still persists, go ahead with in-place upgrade: https://www.kapilarya.com/how-to-repair-windows-10-using-in-place-upgrade
I get the blue screen with error code 0xc000000f
File:\Windows\System32\drivers\N360X64\1607000.04C\SymELAM.sys
I have tried everything in your forums, but am still not having any luck getting my computer to boot. Any assistance is appreciated. I will try everything you give me. Please help
^^ Try booting into Safe Mode: https://www.kapilarya.com/how-to-boot-windows-10-into-safe-mode and uninstall the Norton antivirus program because the SymELAM.sys file mentioned in error comes due to that AV. Then reboot to the normal mode back.
Wont let me reboot in safe mode. I have tried that. Wont let me refresh or reset either.
^^ In that case, go ahead with clean install. Here’s how to: https://www.kapilarya.com/how-to-make-clean-install-of-windows-10
As a follow up to the fix of a corrupted bcd, I have tried everything and even bootrec and here is the outcome imgur.com/a/fMStj. PLEASE HELP.
Hello. I have been on the insider’s build since it was first released and would like to revert back to major builds only without having to resort to a wipe and reload or losing my activation. Is there any way to do this? Thanks!
^^ For this, the only option is to clean install the stable build. You can use latest Windows 10 ISO file for this. Ref: https://www.kapilarya.com/download-latest-windows-10-iso-files
I’m an Insider but cannot find any reliable info on why the Briefcase Folder is no longer an option; more importantly, why my old Briefcase has suddenly stopped working. Windows 10 will not let me create a restore point, for some unknown reason, so I cannot go back to my previous build. Any thoughts &/or solutions would be appreciated. I know I am not alone as people has been asking since 2010 why theirs wouldn’t work… maybe I should count myself lucky?!
^^ You must report this issue via Feedback hub. That would be the efficient way to contact Microsoft, as you’re an Insider 😊
Good day Kapil.
Please dow do I go about the yellow sign on the device manager of my windows 10 pc on pci encryption/ decryption controller, I think it is affecting my phone from connecting to my PC, I’ve tried all the numerous work around I usually get from your post but to no avail, like uninstall, disable, scan, update, and all I know, search online, can’t find the driver.
Any method I can employ. Thanks
^^ What is the device error code in your case?
Error code 28
^^ Since you already tried reinstalling drivers and as it doesn’t helps, I suggest you to confirm that hardware side is working fine. Have a visit to nearest computer repair shop.
Thanks, I think I will manage it since it is not affecting the PC only that it is not seeing my android device. Bluetooth will take over.. How are you doing? Keep up the good and selfless service. God bless. I’m addicted to your site.
^^ You’re always welcome and I’m doing well 😊 It is the readers like you, whose motivation has kept me alive 😎
sir will you please help me how to remove appnord malware from my system
^^ You can try full/complete scanning through Windows Defender.
sir how to e recover deleted videos from recycle bin in easy way after empty recycle bin
^^ You need to contact professional data recovery services in this case.
Sir i was getting the same msg of “your pc ran into a problem and it needs to restart” with a blue screen….i just cleared my c drive by inserting a disc of windows 8.1 as i thought it is because my os has been currepted.. now when i try to reinstall window by the disc after all most 1 % completion it shows the same msg again…your pc ran into a problem…..and it gets restart in a sec and then another blue screen apperars with a msg of RECOVERY written in big letters followed by error code: 0xc0000034
The same process takes place when i restart it again from this blue screen
Please hlp……
sir i lost my drivers for acer gateway NE46Rs ethernet contoller realtek for windows 7 64 bit
^^ You can download the same driver from Acer’s website.
Hi Kapil,
Could use your help.
I have a Surface Pro 4 which started crashing a few weeks ago. I was able to reset/ restore initially ; it crashed again and was able to boot using a USB. It crashed again and now wont boot using a USB as it does not find the SDD. Diskpart lists only the USB drive.
1. I’ve tried the bcdedit /enum procedure you mentioned, but no luck . Still returns the original error (req. system device cannot be found)
2. Scannow process complete with no integrity violations found
3. chkdsk / r returns error : Cannot lock current drive . Windows cannot run disk checking as volume is write protected.
Let me know what else i can try.
Thanks
Tom
^^ Things you may try: check the HDD by connecting to other machine and verify if it’s working properly. Then make sure the boot order gives first preference to HDD not USB. Also perform Startup repair then and see if this helps you.
Thanks for the reply.
Startup repair doesnt work ; returns the following error message : startup repair couldnt repair your PC. Also if i give preference to the HDD and boot through the PC – Internal Storage or Windows Boot Manager- rather than the USB, the surface logo blinks and UEFI screen pops up and then cant proceed further.
Let me know.
^^ On the ‘startup repair couldn’t repair your PC’ screen, click Advanced Options and choose Reset the PC.
There is no “reset this PC” option under advanced.
The options available -under advanced- are :
1. System Restore ( Error message – to use system restore, you must specify which windows installation to restore)
2. System Image restore ( Select the location of the backup and then using the advanced option, i get the message (a) search for system image on network and (b) install a driver)
(a) then asks for a network folder
(b) can look for drivers in the USB or Boot X:\ – dont know which drivers to install
3. Start up repair (mentioned earlier)
4. Command prompt
5. UEFI Settings
6. Go back to previous version
^^ Thanks for keeping me posted. Can you try the in-place upgrade: https://www.kapilarya.com/how-to-repair-windows-10-using-in-place-upgrade
Thanks for the continued help..
The in-place-upgrade option doesn’t exist/ work. Given that I’m booting from the USB, i get to setup and post accepting license terms , choosing to Custom Install (WIndows only), i get the error box : Where do you want to install windows? !We couldn’t find any drives. To get a storage driver, click load driver.
Windows cannot find ‘C :\ProgramData\System32\systemhelp.exe’ . Make sure you typed the name correctly, and then try again.
i tried DISM /ONLINE/CLEANUP…. and then SFC …. and then restrated it . but the popping error wont go. it comes after starting my laptop and then continues .
please, help needed.
When I tried to boot, I received the “Boot Configuration Data file is missing some required information. I’ve gone through the steps you’ve suggested using Installation media:
BOOTREC /SCANOS
BOOTREC /FIXMBR
BOOTREC /FIXBOOT
BOOTREC /REBUILDBCD
I’m getting an error “The process cannot access the file because it is being used by another process.”
I’ve been searching for a solution and hope you might have some suggestions as to what to try next.
Thanks
Mike
Hi Kapil, I’ve ended up with a corrupted MBR after the latest windows update. I attempted a repair using the bootrec command however it didnt work citing that the path was invalid. I then copied over the boot file from the windows installation partition and now the pc attempts to boot which results in a paging fault in non paged area.
The pc then shuts down and goes into a loop of trying to load with a stop error ultimately occuring.
I’ve run diagnostics from the Lenovo bios application and there are no hardware faults.
Be tried a repair using a recovery disk. At first there were no windows 10 installations present however after replacing the bootrec from the other partition is does now see a Windows installation but it won’t repair.
I’m attempting to recover the installation rather than a clean install as I need the files on the drive.
Thank you
^^ Perform clean install on parallel drive. This MAY fix booting issue on original installation. If it doesn’t, continue using newer installation. You can use File Explorer to import your files from original installation.
I have a USB External Hard Drive that doesn’t appear when I connect it to my laptop. The OS is Windows 10. I have a lot of data on the drive that I really need to access.
I tried pasting in the SNIP of the screens but not successful. So I will type them below. I hope you can follow this. I am an oldie and not very computer literate.
In the Control Panel the device appears as
Model: USB TO IDE BRIDGE Status: Driver Error
Category: Storage Device Status: Needs troubleshooting
Troubleshooting said to update the drivers. I tried updating but system said current drivers were okay.
I clicked on USB Mass Storage Device Properties then General Tab
Device status: This device cannot start. (Code 10)
(Operation failed)
The requested operation was unsuccessful.
I would really appreciate some help if possible.
Thank you.
^^ For error code 10, please refer: https://www.kapilarya.com/fix-this-device-cannot-start-code-10-in-windows-10
I updated a driver in my PC and had a problem with internet connection. It states “Not Connected – No connections are available.” I have done all of the methods ok the microsoft website and many others but with no solution. How can I fix this issue?
^^ Try Network Reset:
https://www.kapilarya.com/how-to-reset-network-settings-to-default-in-windows-10
Onscreen display of volume and brightness stopped working suddenly…..have Windows 10 Pro on Lenovo X220……volume and brightness keys work (i.e. volume and brightness are controllable by the keys), but there is no bar indicator on-screen to show at what level these are set at….How to fix this problem? Also, the lights on the microphone key and speaker key (above F1 and F4) do light up, but the microphone “+ / – ” key (above F2 / F3) does not show up as a volume bar on the screen….Thanks for your help in advance.
^^ Please perform the repair upgrade: https://www.kapilarya.com/how-to-repair-windows-10-using-in-place-upgrade
i lost adminstrative rights what is the procedure and solution when i trobule shoot . iwill get my files back. that is my dobut please reply as early as possbile
Hi Kapil Arya,
I heard about you a lot and reading many of your solutions. Thanks for helping everyone. My problem is that my laptop internet is very slow on the home connection, but other devices are having good internet speed. I tried many cmd commands to reset the things. I checked my on my wifi connection that it says(IPv6 Connectivity: No internet access) but I am not sure about that. Please guide me what should I do. Thanks
^^ Hey! First of all, run Network Adapter troubleshooter: https://www.kapilarya.com/how-to-use-built-in-troubleshooters-in-windows-10
hi kapil, I have a problem and have tried every solution i can find online to resolve but keep running into a brick wall. windows bootloop to repair and recovery blue screen. I have done some troubleshooting and can provide you with some observations. I have a UEFI boot bios configuration. The main errors are from bootrec /fixboot – access is denied and bootrec /rebuildbcd – Total identified windows installations: 0. I am currently attempting to troubleshoot using a bootable usb created with windowsmediacreationtool. Ive located my hard drive partition for the UEFI boot which is a 100MB fat32 hidden partition using the diskpart command line and assigned the drive letter b: and reformatted that drive and rebuilt the partition using bootrec.exe /rebuildbcd. Then i run the bootrec /fixboot and is shows access is denied. The c: drive is still intact with the windows directory and programfiles etc… There are 5 partitions in total on disk 0 for which disk 0 has vol 1 – C: – healthy – ntfs – 918gb. so from the b: fat32 drive i go into the efi\microsoft\boot directory and try to copy the bcd store by typing bcdboot c:\windows but get the error BFSVC error: Could not open the BCD Template store. status =[c000000f]. This is where i am stuck and cannot proceed further. If i restart the computer i just reenter the bootloop. Please help
Hi. Imaging device is missing in Device Manager and because of this camera isn’t working. How to resolve it.
Hi kapil
Dear I am facing a problem right now. I have done system restored on my window 10 bcz of some issues. Then it’s giving problem of 0xc0000001. For this I made bootable window 10 USB as i saw in one utube video. I went to comand prompt and I write bootrec/fixmbr. Operation was successful but when I entered bootrec/fixboot it’s coming access is denied and I am failed here to give next commands and I am badly stuck. Please guide as soon as possible. Thanks
Accidently deleted administrator account on windows 10 I’ve tried the steps from Kapil in the Windows forum. No Help.
I can’t even do a system restore. What can I do?
Would like to know if there is any way to block auto install of a device driver in win 10 v 1803. I have uninstalled and deleted driver file so it would install basic windows driver (which is all I want), and then whenever I connect to internet the thing auto installs again!! UGHHH!!! Anything I can do? BTW it’s win 10 home, not pro. Thanks!!
^^ This article is for you: https://www.kapilarya.com/prevent-automatic-device-driver-software-updates-windows-10
Already tried that, DOESN’T WORK!! also tried to find something in the registry, but am not sure I got it all. It’s still auto installing Drivers. Are there any registry hacks for this? Thanks!!
Okay, I solved the problem. Downloaded “wushowhidediag.cab” from Microsoft and that seems to have fixed it for now. We’ll see how it holds up!
Thanks again!!
^^ Glad this is sorted now 😊
Oh well…I WAS WRONG!!! The thing STILL reloads and installs!!!
It worked for about two logons then reinstalled. I have been on Msoft forums as well trying to sort this out and none of their suggestions worked either (they were pretty much things I have already tried anyway).
So, it looks like I’m stuck with this POS OS!!! Again, this is ver 1803, not 1709 or previous. Apparently they have shut down all the workarounds that worked before with this new version. Pretty frustrating to know that they apparently think they are the only ones that can decide what we can and can’t do with our machines.
TIME FOR A NEW LINUX INSTALL!!! : )
My WD external HDD wasn’t able to connect with PC/laptop but after connecting disk was running LED blinking and a clicking sound coming from disk. What kind of issue is this? Is it possible to recover my data from HDD? Please provide your valuable suggestions.
Regards,
Er.Prabhakaran
I was looking for some info on how to do a windows 10 back up so if I lose data when performing fixes then I have the system/file back up to restore with. I find it totally confusing when I look in my backup thing as its all folders and it mentions file history I just want to back up the whole thing and I have 2 drives c and d drives, d being the bigger one with lots of stuff stored on it. I used Microsoft info online for back up info to find a way to back up a windows 10 laptop simply and quickly and followed instructions to go to my control panel where I found that it says back up windows 7. It left me with even more questions than I had to start with lol. Why would I want to back up windows 7 on a windows 10 laptop? Why is that even on my laptop? If it does do windows 10 too then the title is confusing. Not everyone is computer literate ( I am to an extent but have my limits) and have never backed up a windows 10 computer before (I did it years ago on a previous older version computer with discs) nor have I used an external hard drive, this will be a first for me. It would be lovely if you could make backing up a topic here and how to do it. Also there are no instructions any where on the internet about computers with 2 drives and back up. Its such an important thing to have to do if you really need to reset your computer for some reason. People probably are reluctant to go there if the way is unclear. Many thanks for your help to everyone , you do great work.
i really need your help
i have windows 10 installed on my SSD
it was working all fine but suddenly few days before i was not able to install aything on c drive as it was giving me an error as error opening file for writing
i cant even copy anything on c drive as it gives error as : a required previlage is not held by the client
i found write permission were unticked in security and i ticked them in c drive properties
for both program file folders ticking write option was not available so i tried changing owner from trusted installer to admin and gave full control to users apps etc
but still the problem persists..
^^ I suggest you to perform repair upgrade and see if that works for you: https://www.kapilarya.com/how-to-repair-windows-10-using-in-place-upgrade
My windows 10 pro shows “The group or resource is not in the correct state to perform the requested operation” and, before appeared it my pc my pc slow down about everything functions’ and internet… I searching to resolving the problem and all info don’t fix it. Windows event viewer said dates and time for all problems errors and warnings bud how to fix it each when pc works fine waiting next slow down and pc freeze… Search “the group or resource is not in the correct state to perform the requested operation” and you see.
^^ Perform repair upgrade, see link in my previous reply here.
The product key supplied along with the Windows 10 installer does not work. What can I do?
hi,my laptop is telling that my windows license will expire soon.But there is no error code and when I checked my settings,it showed that windows was activated.But I am getting same message again and again.I need your help.
^^ Please refer this fix: https://www.kapilarya.com/your-windows-license-will-expire-soon-for-windows-10
Installed new EERO network to replace ASUS, used same network name. All Apple devices work great at 150MBPS. Two Dell windows 10 computers only get 5MBPS download speed, upload is normal. Tried all basic fixes, reset network, change network name, updated drivers, etc. Two hours with GEEK squad, they couldn’t fix it. Seems to be remembering something from prior ASUS router which is throttling speed best I can tell.
Any fix ideas??
Re This app can’t run on your pc
This concerns the Ultimate Family Tree family history programme that we had been using for many years and we still want to use it but windows 10 will not let us do so. The last time we used it was on a vista but we had to change to windows 10. We find virtual computers are being a problem to install even though a while ago we had managed to install one on a windows 7. Therefore, we wish to still use this (maybe outdated to some) family history programme with which we are comfortable. Installation from the CD to windows 10 seemed to work but when I attempt to open it, “The system is out of memory or resources” appears. This used to be solved by a patch but now “This app can’t run on your PC” appears for that.
Please can you help us use the ultimate family tree programme again. Thank you.
^^ I suggest you to consult with software vendor to confirm, if they’ve released compatible version for Windows 10.
Thank you for your reply. Unfortunately, Ultimate Family Tree products have been discontinued effective June 28, 2001. web.archive.org/web/20020107130914/http://www.uftree.com:80/UFT/UFTProductInfo/OrderNow/ordernow.html
It certainly worked with the vista so it is a pity that windows ten will not let it work.
My HP laptop has stopped sending print jobs to the printer. I get an error notice that the spooler has stopped working, but I can’t get it to restart.
^^ What exactly happens when you start Print Spooler service?
Hi Kapil, I follow your solution to fix No Audio Output Device is installed, and everything was Ok until last week now is back again and I have been working to fix it like before but no luck is not working. Can you please let me know if is any solution to this problem I have Acer aspire windows 8. Thank you for your time and help. Best regards Nora
^^ Try installing latest audio driver from your OEM website.
Hi
I need your help regarding windows 10. I restored my pc to a previous restore point, & it started fine. But then BSOD with error “critical process died” came and after that the pc failed to boot. Everytime i restart same BSOD comes. I have tried every option available including:
1. system restore(i can select restore point but cant select drive C bcz it says enable drive protection)
2. Startup repair(windows is unable)
3. Uninstall upgrades(error:we ran into a problem)
4. Safe mode(cant boot into any safe mode whatsoever)
5. Command prompt(tried both sfc and dism commands, no use)
I dont have windows recovery dvd. I cannot afford a clean install bcz i have very important data on drive C. Plz help
^^ Replied your comment at https://www.kapilarya.com/reinstall-windows-10-without-affecting-personal-files
Hi,
So I’ve been using my HP pavilion laptop (Windows 8) since 2013 with zero little to zero problems until last week I had to force shutdown the PC and on restarting it read the message under the HP icon
‘Preparing Automatic repair’
then after a while, the dreaded blue screen of death showed with the message
‘your PC needs to be repaired’
Error code: 0xc0000185
then the information about using recovery tool From my installation media to fix the problem
prior this unfortunate incident, I never knew about creating an installation media or recovery tool backup. so I don’t have that.
I went online and found some with similar problems and answers they got to solve theirs. Which most of them had an installation media or accessing the computer to create the media.
Here’s another of my PC problems; I can’t access the PC anymore as the OS refuses to load beyond the blue screen of death.
when I try to use the function key options to either restart the pc or perform a system recovery, I receive another blue screen of death with new message saying
‘this operating system cannot be loaded because a file is missing or contains errors’
File: CLFS.SYS
status: 0xc0000185
then the information about using recovery tool From my installation media to fix the problem
now
1. I don’t have an installation media to run the recovery tool.
2. I tried downloading some online to run on the pc but the PC doesn’t seem to spot the file
3. while the BSOD displays, the system abruptly turns itself off.
4. I can’t access the PC beyond the BSOD and uefi, so I can’t create nor carry out a recovery to revert to previous state of the pc.
5. I’m hoping for some clarifications and possibly option(s) on what to do to help salvage my situation without losing my personal files. I don’t really mind losing any installed app. I just want my personal files safe.
Thanks
^^ Using another device, you can download Windows 10 ISO file and create a bootable USB: https://www.kapilarya.com/how-to-create-bootable-usb-from-windows-10-iso-file-using-command-prompt. Then boot using this USB drive and try steps mentioned here: https://www.kapilarya.com/your-pc-needs-to-be-repaired-0xc0000225.
the PC is running on a windows 8 OS not 10. Hope there won’t be any problems arising from possible incompatibility
^^ Unfortunately, Windows 8 ISO is no longer available. I suggest you to check if the RAM is working correctly on your system. In recovery mode Command Prompt, type CHKDSK /R i.e. CHKDSK C: /R and press Enter key. If RAM is faulty, you can go to nearest computer repair shop to fix this.
hi Kapil Arya :
pleas u send me that link when i have problem to delete wireless in windows 10 ….
https://www.kapilarya.com/how-to-delete-a-wifi-network-on-windows-10
i try that but not working withe me i mean its delete but when i restart laptop look like nothing i do .
i try to format my laptop from online windows site or from from ( USB boot ) start and i format the disk . but same problem even when i format laptop its not ask me for Activation key and when i finished format i see my windows is activate by him self for my old key .
so can u help me pleas what i can do ?
^^ Make sure you delete the exact wireless network profile registry key. Windows activating itself after reinstall is expected, if you’ve OEM license. Clean install should remove all wireless profiles from registry.
yes i do have OEM and i do all what u say but did not removing and keep connected auto. did u not have any program to delete everything ?
hello Kapil
i do have a problem withe a mobile hotspot its keep cutting always i to try many thing like stop power management and i do change the power plan power saving mode to maximum performance and i do reset the network and i do use cmd netsh to reset . but nothing and keep cutting so did u know what i can do ?
^^ Try updating the network driver to latest version and see if that helps you.
Hi Kapil,
I am facing problem in windows 10 LTSB version it takes too long for restarting the machine ( nearly 7 to 10 mins). Once I removed the machine from the network it restarts normally sometimes. Without the Network cable also the same issue but it takes minimum 2to3mins to restart.
These are the activities done on Test and User computer
Uninstall the antivirus
Update the Latest Drivers of System
Upgrade the BIOS of System
Unjoin from the domain and rejoin with different Computer Name.
Try with Both versions of Windows 10 (1511, 1607 LTSB).
Ps: This issue not in the specific model ( Desktop & Laptop). Any other suggestions, please.
Thanks
^^ Please create a System Restore point and then perform Network Reset: https://www.kapilarya.com/how-to-reset-network-settings-to-default-in-windows-10. See if it helps you!
Thank you for the suggestion. For your information, most of the windows 10 pcs have the same issue ( It takes a too long time for restarting machines). Do we have to do the network reset for all machines?
Once machine joined to the domain the first restart was quick and normal to restart the machine. But after the Group policy, antivirus update and SCCM installed then if we tried to restart the machine that time it takes minimum 10mins to 20mins to restart.
We have installed the Latest 1607 build also but the same problem. Do we need to check in Group policy? bcoz it is affected for all windows 10 machines.
^^ If possible, isolate and perform Network Reset on one machine and see if that works. If yes, go ahead with other machines. Regarding Group Policy, please consult with your system administrator or IT person because it is totally depending upon your environment.
Hi Kapil
Battery will not charge though AC is functional as is battery. A few days ago the laptop started functioning strangely as if from malware. Among others charger stopped functioning. Ran mwbytes and several other progs but nothing showed up. Uninstalled drivers in dev mgr did not help. Today I ran driverbooster and it showed a malfunction in battery drivers. When it got to the point that it was fixing those drivers the battery suddenly started charging for two seconds and then stopped again. No idea what is going on. Any suggstions? Thanks,
^^ Assuming you’re on Windows 10, run Power troubleshooter and let me know what it reports back: https://www.kapilarya.com/how-to-use-built-in-troubleshooters-in-windows-10.
Hi kapil, I’m having issues with my windows 10. i did a factory reset and after installing windows 10, the screen keep showing ‘just a moment, and keep loading. it has been almost 4 days now. What should i do?
^^ Is your system connected to web? If yes, disconnect it and see if you can go ahead.
I can’t connect to internet. Network troubleshooting says “Your Computer Appears To Be Correctly Configured, But The Device Or Resource (DNS Server) Is Not Responding”. My laptop is windows 10. Can you help me with this.
^^ Sure! Refer this fix: https://www.kapilarya.com/your-computer-appears-to-be-correctly-configured-but-the-device-or-resource-dns-server-is-not-responding-windows-10.
Hi
I have been running ReImage on my computers (2) without any problem until now
It ran its scan found some errors and kept getting stuck when scanning One Drive, So i removed One Drive (as I don\t use it to see if that negated the problem – unfortunately no, it then got stuck when scanning an Nvidia file. As it wasn’t correcting any faults, I stopped using it until today. That is when the problem occurred .
The program froze so naturally I restarted the PC. It booted fin, came up with my name but keeps coming up with incorrect password – the same password I have used for the past six weeks since I bought the computer and it is stuck min Aeroplane mode. As I cannot log on despite trying restarts, and getting into System Restore, etc, it will not let me in. I have tried your solution of Function f2 and print screen without success. I do my back ups manually each week on Monday nights as I have been doing for the last fifteen years. Went to log on today and this happened. I have garndson photos and a weeks worth of work to back up – this can\t be replaced. I will have to accept that but I have also tried to make an emergency boot USB but as I cannot access via the Boot screen as it won’t recognise my password. I’m all out of ideas .. please suggest something .
\I am still waiting to hear from ReImage that “assure” they will fix the problem, otherwise I have a $4000 piece of scarp that’s six weeks old and have lost all the data from my last weeks work recent photos of my little grandson and all the paid (downloaded) software with all the purchase details on the pc that wont recognise me by face or password. And yes, I have now learnt my lesson – daily back ups and get rid of ReImage !!!!
Regards
Steve
^^ Steve, TBH, I haven’t used Reimage software so can’t comment on its working. What I can recommend you in this case is to backup all the data and perform clean install. That would hopefully solve most of your problems without spending any money.
I have a VPN (PPTP) problem with Win10. A Win10 client works with a Win7 server but not with a Win10 server. If I use netstat -q on the server there is no sign of port 1723 listening. I have deinstalled and reinstalled PPTP WAN miniport and run sfc/scannow. Win10 is fully updated.
Addition : it worked once but after powercycling it didn’t work
^^ Make sure Remote Access Auto Connection Manager service is set to Manual, see if it helps.
It worked once when setting it to manual but after a powercycling it was back to not work. How shall Remote control connection manager be set?
Sorry, Remote access connection manager
^^ Try setting it via registry: https://www.kapilarya.com/startup-type-options-greyed-out-for-services-in-windows-10.
The settings are not greyed out. What start method should be used for Remote access connection manager?
Rasman is set to automatic start and running and rasauto is set to manual start and stopped. I suppose this is correct but I can’t connect using PPTP.
Isn’t it so that after I have configured an incoming connection I should be able to se that the computer is listening to port 1723 with netstat -a and that I have a PPTP adapter with ipconfig /all. Well, I can’t!
^^ Remote Access Auto Connection Manager can be set to Manual/Automatic. Does the issue occurs when you perform clean boot https://www.kapilarya.com/how-to-perform-clean-boot-in-windows-10 ? Additionally, try disabling fast startup and see if that helps.
Kapil, I deactivated all programs, it didn’t help. How do I disable fast startup? I have the same problem on 2 PC:s running Win10 Pro 1909. It happens that it works but after powercycling it doesn’t work again. It’s very difficult to tell why it works, once a registry clean made the trick but it didn’t survive powercycling.
Kapil, can you please answer my question concerning what I should see after configuring an incoming connection?
^^ As you said issue getting reverted after powercycling, disabling fast startup might helpful: https://www.kapilarya.com/how-to-enable-disable-fast-startup-in-windows-10.
Yes, Kapil, that solved my problem. Thank you VERY much.
^^ Glad I could help. Thanks for your patience and updates 😊
I am running Windows 10 v1809.
My computer has been unable to load updates with error messgae 0xc1900101.
No additonal info provided.
I have no issues when I check “Device Manager”
I am certain all of my drivers are the latest including AMD video card.
I have unlugged all external devices with no additonal luck.
I have loads of hard drive space and I really do not want to start a fresh Win 10 load.
How can I isolate offending issue?
Thanks
^^ Please run Windows Update troubleshooter from Settings app > Update & security > Troubleshoot. Let me know what it reports back.
Hello Kapil sir,
when i open any application in my laptop , it run smoothly for few minutes and sometime it pup up with error dialog box saying ‘ Aw swap. an error occurred , Something went wrong .The exception unknown software exception (0xe000000008 ) occured in the application at location 0x00007FFF2149A839. ‘ And immediately after this message window screen appear as black and my laptop stop working.
please sir help me in this problem I cat focus in my project with this problem /[. I am having thus problem from 10 days.
^^ It seems like a memory problem, run Windows Memory Diagnostics: https://www.kapilarya.com/how-to-use-windows-memory-diagnostics-in-windows-10. Also perform disk error checking: https://www.kapilarya.com/how-to-perform-disk-error-checking-in-windows.
many of my administrator rights are being blocked giving the error “this app has been blocked by the admin”..even the task manager is blocked
i have checked out this video of yours youtube.com/watch?v=6mzJWbwP80A&feature=emb_logo….but the security policy is not available in my windows..i am the only user on my computer and i am the administrator so i dont understand why is this happening..can you help?
^^ Kindly refer steps mentioned here and let me know which step doesn’t works for you: https://www.kapilarya.com/fix-lost-administrative-rights-in-windows-10. Comment directly on the post, I’ll help.
hi, can you help me… my laptop using win 10 home 1909. in three weeks i have this laptop my explorer crashed everyday at least 2 times. i’ve doing all solution on internet (scan, disable shellext, reset windows, clean boot, upgrade driver, reinstall driver.etc) but no one worked, even i’m doing clean install 3 times. after i generate file dump, the problems is “heap_corruption”. i don’t know what is that, and how to fix.. can you give me a solutions please. thank you
^^ Try resetting File Explorer: https://www.kapilarya.com/fix-file-explorer-not-working-in-windows-10. If problem continues, you need to create new thread in MS Community and include the crash log. Log analysts present there should help you to sort this.
Hi. I have been experiencing error code 0x0000225 and have tried both your method and the bootrec method. However, I always encounter “Access is denied” when booting from the installation media and entering the command prompt “bootrec /fixboot”. I formatted the partition successfully but this doesn’t help. What should I do?
^^ Please have a look on this fix: https://www.kapilarya.com/fix-bootrec-fixboot-access-is-denied-in-windows-10.
Hi Kapil, I am facing camera detection issue with my laptop. That is HP830 G5 and it seems windows issue because I have updated all driver like BIOS, Graphic, Chipset, Graphic etc. Error is ‘we can’t find your camera’ and error code is 0A00F4244
Please help me out.
Thank you.
^^ Can you locate the camera driver in Device Manager? If yes, is the device is working perfectly?
My Dell E630 is running so much better with a 1TB HDD and much more recently doubling the RAM from 2 to 4GB. Before making any OS change now I want to evaluate the possibility of switching BACK to Windows 10 after an unhappy previous try to use it several years ago. Since that was done by a download of the free version and done on the old HDD, it seems wisest to me to inquire with MicroSoft about retrieving the digital license without doing anything first. None of the Q&A searches I have tried can “duplicate” my particular situation and your friendliness on this page urges me to make this inquiry with you. So thanks!
^^ If you’ve retail license, you can go ahead and upgrade your license. You may require to reactivate, so follow this guide: https://www.kapilarya.com/fix-windows-10-activation-lost-after-hardware-change. If you’ve OEM license, as long as motherboard remains same, your Windows will be automatically activated upon reinstall. FYI, to find type of license on your computer: https://www.kapilarya.com/how-to-check-type-of-windows-10-license-installed.
I am not able to install NET framework 3.5, 4.0, 4.5 or any newer version. the installation gives me an error code of “0x800f080c” or I get a warning of ” Microsoft NET Framework 4 is already a part of operating system, but it is currently turned off. To enable the .NET Framework 4, use Turn Windows Features on or off in Control Panel. So…… when I go to the Windows Features to turn the .NET Framework on, it is not there. the only thing close to it is the “.NET Environment, >NET Extensibility 3.5, NET Extensibility 4.8 and ASP .NET 4.8. By turning these features on, it has no affect to the system and I am still unable to install several software that require it.
2 weeks ago, I had to “Reset Windows” and by doing so, I had to reinstall several software including Office 365. Even Office 365 gave me a headache installing but after around the 5th time attempting it, it finally installed correctly. It seems to me that the Resetting of Windows is what has created this problem.
I am currently Running Windows 10 on my laptop – please advise of the next steps in which to take.
I have upgraded from Windows 7 to Windows 10 online. I am facing problem of 100% disk usage and the system becomes very hot while processing applications. The fan rotates very fast when this happens. Due to this, I am facing problem in the display which goes blank suddenly.
^^ Please refer: https://www.kapilarya.com/fix-windows-10-100-percent-disk-usage-problem.
Hi.I am facing a problrm .Although my pc is 64 based OS,I can’t upgrade to 64 bit.Pleasehelp me with this ^^.It always saying this apl can’t run on your pc.
^^ What version you’ve right now? Are you doing system or app upgrade?
Hi Kapil,
I read you proposed solution below. Have you heard about it ever working? I can’t upgrade to the new Edge until they implement all of the ink features (including highlighter).
Thanks
Microsoft edge pdf notes not saving
answers.microsoft.com/en-us/edge/forum/all/microsoft-edge-pdf-notes-not-saving/4dee9787-00b9-4591-aaaa-c4045ce119db#:~:text=You%20can%20reset%20Edge%20in,%2Dapps%2Dre…
^^ It helped some users, you may try and check.
Hi, perhaps you can help me. So I have windows 8.1 installed, and I cannot activate it for some reason. I bought a product key, and windows isn’t accepting it. When I try to activate with cmd using slmgr /ipk, I get this pop up:
Error: 0x80070422 On a computer running Microsoft Windows non-core edition, run ‘slui.exe 0x2a 0x80070422’ to display the error text.
Thanks for any help!
cannot find camera
i reset my laptop and it will not expt my log in. also there is a small box in the botom right corner with a airplane in it and itwill not move
^^ See if this helps you: https://www.kapilarya.com/fix-windows-10-stuck-in-airplane-mode
Hello,
I work with a System of win 7 and win 10 together on my Computer. BIOS ist UEFI. With a bootmanager I can Switch to a Selected System during start.
Yesterday I got a failure like your Description with win 10. Win 7 is still Wirkung.
FIX : ‘Your PC Needs To Be Repaired. Error Code 0xc0000225’ In Windows 10/8.1/8.
But when I listend all Volumens there is no Label with „ESP“.
Why and what can I do?
Greetings
Georg
^^ Please refer this fix: https://www.kapilarya.com/your-pc-needs-to-be-repaired-0xc0000225.
This fix “[FIX] Service Host: Diagnostic Policy Service High CPU Usage In Windows 10” worked great for me. It’s been driving me nuts. Thanks!
^^ Glad it helped!
Hi kapilarya,
In my system bitlocker is enabled and I have opted for windows insider preview and since I am facing some issues I asked the microsoft customer care to have stable build she told me download iso file and we will install and with bitlocker disabling we did installing and after some time the screen hot black and gone into windows boot manager and when I tried with recovery mode it is only showing blue page without options
In windows boot manager page it is showing windows failed to start a recent hardware or software change might be the cause and error as
The application or operating system could not be loaded because a required file is missing or containing error
Hi. My name is Sam
I have a Dell Inspiron version 1545 laptop. It was working great 3 days ago but , 2 days ago I powered it up and got this error screen. Recovery Your PC/Device needs to be repaired. The boot configuration data file is missing some required information. File\Boot\BCD. Error code: 0xc000000d. You’ll need to use recovery tools if you don’t have any installation media contact your PC administrator or Manufacturer. Is there an easy way to fix this?
^^ Please try repairing boot records: https://www.kapilarya.com/fix-windows-10-master-boot-record-corrupted.
Hello Kapil Arya, a good day to you, hopefully, you are keeping/staying safe.
Only by accident I ran onto your name and the work you do. I have window 10 on my computer, for the first time on Thursday, July 23/20 I tried to use the camera, it did not work. The message: MAYBE THE CAMERA IS BLOCKED BY AN APP etc. There is a # 0xAO0F4244<No Camera (Are) Attached. I tried many things. I have no computer skills. PLEASE HELP.
Lawson
^^ Please refer: https://www.kapilarya.com/fix-we-cant-find-your-camera-0xa00f4244-windows-10. Stay safe!
the UsrClass.dat isnt available in my windows files and I guess that is what causes me problems on the action center
In the “try to re-register Start Menu” instructions, the indicated message to type appears to have an error. “Get-appxpackage-all” gets an ” unregognized” message.
^^ Try copy-pasting exact command mentioned here: https://www.kapilarya.com/re-register-start-menu-windows-10.
Here is my case history – can you please advise
Did Updates on 14 and 17th
Feature Update 14th August
Cumulative >Net update 17th August
Security Update adobe 27th August
yesterday on turning of desktop it was not showing my usual profile “Kapil Murdia” it was getting into a temp profile opening a temp profile by itself
However it was showing desktop files in Kapil Murdia as temporary files
did this step this morning – got this from Microsoft site for registery
https://www.kapilarya.com/youve-been-signed-in-with-a-temporary-profile-in-windows-10
now it is showing Kapil murdia but no files seen now
in system restore it says last restore point was 27th August 12 30 am
^^ You should be able to get your files before you moved into temporary profile. Files in temporary profile is not saved and gets deleted after session is over.
Request for help: Files deleted in Desktop
Hi Kapil – can you please help here, briefly here is the case history
Did Updates on 14 and 17th
Feature Update 14th August
Cumulative >Net update 17th August
Security Update adobe 27th August
yesterday on turning of desktop it was not showing my usual profile “Kapil Murdia”
it was getting into a temp profile
opening a temp profile by itself
However it was showing desktop files in kapil murdia as temperory files
did this step this morning – got this from Microsoft site for registery
https://www.kapilarya.com/youve-been-signed-in-with-a-temporary-profile-in-windows-10
now it is showing Kapil murdia but no files seen now
in system restore it says last restore point was 27th August 12 30 am..
It looks like profile might be corrupted : I cant save on C drive –
message : you don’t have permission to save in this location. contact the admin to obtain permission. would you like to save in documents folder instead?
i m logged in with Kapil murdia and it says I am admin in settings..
any way to get Desktop files that are not showing — all the C drive files are intact…this is SOS call please help…
Kapil Arya
^^ You should be able to get your files before you moved into temporary profile. Files in temporary profile is not saved and gets deleted after session is over.
Question – how to get those files before I moved to temp profile. I don’t see them In my user name now..is there an email where I can send screenshots.
^^ Are you able to login to usual profile now?
^^ Are you able to login to usual profile now?
Yes but does not let me save in the C drive – getting message below –
you don’t have permission to save in this location. contact the admin to obtain permission. would you like to save in documents folder instead?
in looking at User account the same profile is admin..
I have only had one profile and no admin profile..
any change I could send you everything on a email please?
^^ It seems you lost admin rights. Kindly refer this fix: https://www.kapilarya.com/fix-lost-administrative-rights-in-windows-10.
I would liike to thank Kapil for his hard work here and commend that spirit. I have tried in vain to recover my run as administrator privileges using all your suggestions. Unfortunately it did not work. I had to revert back to version 1809. I have for the time being stopped trying as run as administrator is important especially for Steinberg and Native Instruments software.
^^ Is the issue resolved after reverting to V1809?
Yes everything back to normal, delayed update for another month and all functionality returned .
^^ Paul, have you tried all the steps here: https://www.kapilarya.com/fix-lost-administrative-rights-in-windows-10
Hi Kapil, got to know about this wonderful website through an answer of yours from Microsoft forum, I am having a serious issue with my Windows 10 system, as with Windows 10 build 1803, I was able to run any low spec computer game, but after upgrading to build 1807, things didn’t worked out for me and then went for build 2004 and the problem still persists, what happens is that after starting the game, OS crashes and i would have to power ON to start it, thanks in advance for any future advice or help.
^^ Thanks Prashant, I recommend you to contact the game developer as they can provide you better assistance than anyone else in this case.
Thankyou Kapil for your reply, but unfortunately, development of the game (PUBG PC LITE ::lite.pubg.com/ ), has been abandoned (lite.pubg.com/2020/04/16/2020-april-dev-letter-dev-status-of-pubg-lite/ ), btw can you recommend a way to check, why my OS crashes whenever i run PUBG,
have tried event log and reliability history, all the indicate is that the system wasn’t properly powered off.
typo edit: all *that is indicated is that
Hi Kapil, yes I did try everything on that page, to no avail. Just an FYI,originally when I tried the update I was unable to even use my menu or access settings for control panel as well as losing track click use as admin. The last time using your method I was at least able to access Settings on the Menu, but still no RT click admin privilege
Paul
^^ I recommend you to try clean install once.
Hi Kapil, my problem was resolved, the unexpected issue was due to thermal shutdown, further details can be found here (forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/G50-70-crashes-without-any-system-error-or-warning/m-p/5044845 ), thanks for your valuable time and advice.
^^ Glad the issue is resolved Prashant!
Hi Kapil,
I am worried about going installs as my licensing on software has only a limited number of refreshes and I only have one left, I would like to keep that in case of hard drive failure
Hello, Kapil,
I am running into one windows update which will not install no matter what I try.
Offline Download and install fail from windows Catalog.
Dism and SFC scans do show some corruption.
How do I replace those corrupted files which are being reported in the CBS and dism logs.
Regards and thanks for all the helpful tips you have provided.
^^ Which version you’re currently on? Also, which update (KB) doesn’t installs?
Thank you for your reply.
——————————————
-which version and build number of Windows
Windows 10 1909
——————————————-
– KB number
KB4574727
———————————————-
Cab install error
c:\temp\cab>Dism /online /add-package /packagepath:c:\temp\cab\Windows10.0-KB4574727-x64_PSFX.cab
Deployment Image Servicing and Management tool
Version: 10.0.18362.1
Image Version: 10.0.18363.628
Processing 1 of 1 – Adding package Package_for_RollupFix~31bf3856ad364e35~amd64~~18362.1082.1.10
[==========================100.0%==========================]
An error occurred – Package_for_RollupFix Error: 0x800f0831
—————
Attached are the CBS and DISM
Hope this can shed light into what may be the issue.
Thankyou so very much
^^ You need to install latest servicing stack update (SSU) before installing this update. Download and install KB4576751 from Update Catalog and then install this update.
when i open up my virus and threat protection, it will appear tab of “your IT administrator has limited access to some areas of this app, and the item you tried to access is not available”. i have tried for so many ways to settle all this problems but it just cant. i hope that you could resolve my problems 🥺
^^ Please refer: https://www.kapilarya.com/your-it-administrator-has-limited-access-to-some-areas-of-this-app
Receiving error code 0x80073712 running 2020-11 Cumulative update KB4586876. Do you have any ideas?
I attempted to run DISM no luck, must be using left handed key board. Also ran sfc/scannow ran to completion.
^^ Try this guide: https://www.kapilarya.com/install-a-specific-windows-update-in-windows-10.
When attempting to open an Office 365 Word or Excel document, I get this message:
Application Error
The application was unable to start correctly
oxc0000142
Click OK to close app
^^ Refer this fix and see if it helps: https://www.kapilarya.com/the-application-was-unable-to-start-correctly-0xc000007b-windows-10.
i have bought a minecraft realm plus subscription on free trial using my microsoft account on ps4 but since i am a minor i used my dad’s credit card so now when i log in to delete the subscription it shows that i have no realm plus subscription what should i do know and how do i delete it or prevent it from autocharging
^^ You can cancel subscription using this support article: support.microsoft.com/en-us/account-billing/how-to-cancel-your-microsoft-subscription-c2c6b0e3-cab3-cb98-d83e-c9ad54620530.
Hello team,
i was unable to see the screenshots from today morning, in pictures – screenshots. then i followed this https://www.kapilarya.com/fix-screen-capture-not-working-in-windows-10. after doing this, i can see my new screenshots in the folder %USERPROFILE%\Pictures\Screenshots. But my old screenshots folder has gone from pictures. it is completely not available in the pictures folder. i had some important screenshots in that folder. i dont know how to find it. I Lost Screenshots folder from Pictures folder. can anyone please help me how to get back those pictures
^^ Have you recently made any changes to computer (such as feature update installation etc.)? Check Windows.old folder, or see if there is another Screenshots folder in picture library.
I dont know exactly, On 11th Dec, a Feature update to windows happened. But after that also i have taken some screenshots. and my last screenshot was on 17th dec. and today i tried to take some screenshots, but they were not saved in the screenshots folder under pictures. so that’s why i have tried those steps. then that entire folder has gone under pictures. i can see my new screenshots in %USERPROFILE%\Pictures\Screenshots. and i didnt find Windows.old folder. and there is a new update available in my system – SAMSUNG Electronics Co., Ltd. – Modem – 2.17.6.0. Status – Pending install. if i install this, will my screenshots comeback or not. other wise please let me know, what should i do to get that folder back. thanks
^^ See if you could make a System Restore to 17 Dec or earlier: https://www.kapilarya.com/configure-and-use-system-restore-in-windows-10.
thanks for the reply sir, i have restored the system to 17th dec. Now i can see the Screenshots folder under Pictures. But i cant see the older screenshots, i am seeing only 2 latest screenshots, remaining are not visible. in the properties it is showing, folder has 82 files. but i cant see them. can u please help me
^^ As you’ve restored system, you should have got your screenshots back, unless I am missing something here 🧐
ohh no, sir, but it is showing that it has 82 files in the properties. Why i am not able to see them. and one more thing, just now i have captured the screen again, and the name of that screenshot is screenshot373. because the last image is 372 in the folder.
After a windows update the microsoft store apps disappeared from my computer and they cannot be re-installed from Microsoft Store. When I click on GET nothing happens or the message “You’ll need a new app to open this ms-windows-store” I tried all the fixes (about a dozen) that were posted but none of them worked. (sfc /scannow ; DISM /Online /Cleanup-Image /StartComponentCleanup ; DISM /Online /Cleanup-Image /AnalyzeComponentStore ; Dism.exe /online /Cleanup-Image /StartComponentCleanup ; Dism.exe /online /Cleanup-Image /StartComponentCleanup /ResetBase ; DISM /Online /Cleanup-Image /ScanHealth ; DISM /Online /Cleanup-Image /RestoreHealth ; Get-AppXPackage *Microsoft.WindowsStore* | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml”}
With the last one I get the error message in power shell: “Add-AppxPackage : Cannot find path ‘C:\AppXManifest.xml’ because it does not exist.”
The CBS log file shows this:
00000218 [SR] Cannot repair member file [l:8]’calc.exe’ of Microsoft-Windows-calc, version 10.0.19041.1, arch Host= amd64 Guest= x86, nonSxS, pkt {l:8 b:31bf3856ad364e35} in the store, file is missing
0000021a [SR] Could not reproject corrupted file \??\C:\WINDOWS\SysWOW64\\calc.exe; source file in store is also corrupted
Any help please?
^^ Suggest you to try the repair upgrade: https://www.kapilarya.com/how-to-repair-windows-10-using-in-place-upgrade.
ohh no, sir, but it is showing that it has 82 files in the properties. Why i am not able to see them. and one more thing, just now i have captured the screen again, and the name of that screenshot is screenshot373. because the last image is 372 in the folder.
any help sir about this. please.
Dear Sir,
I am facing No Connection issue with Windows 10 20H2, When I connect to wireless network, connection shows for few seconds only and it goes no connection but internet works fine, I tried troubleshooting which is shared by you for Windows 10 2004 version but issue is same. Please me.
^^ Try Network Reset: https://www.kapilarya.com/how-to-reset-network-settings-to-default-in-windows-10.
Hi Kapil,
Which hive do i apply registry key in Citrix session for all users? im trying to add Outkook Security key
Will it be under HKCU or HKU OR HKLM?
is there anywz i could contact u directly?
^^ IMO, you should try HKU. For instant support, you can follow and tweet on @KapilAryaMVP.
I have windows 10 version 1909 and trying to upgrade to version 20H2. The install has been stuck at 61% for three days now. I have a digital download of windows 10. Please Help?
^^ Make sure you disconnect external devices while performing the upgrade.
Having no luck. Task mgr ‘processes’ shows disk at maybe 3%. ‘performance’ show 100%. system basically slow or seems to be locked, but isn’t just really slow. used process explorer’ showed nothing unusual. I’ve tried just about everything i could find on this and no help.
^^ Try performing clean boot and eliminate third-party software causing issue: https://www.kapilarya.com/how-to-perform-clean-boot-in-windows-10.
Hello, I have Bluetooth Driver deleted or un-installed on my Computer / PC. And I do not know how to re-install it or update the driver for it. Neither do I know the manufacturer for the Bluetooth Drivers. My PC model is Alienware Aurora R10 Ryzen Edition.
^^ You can get your Bluetooth drivers here: dell.com/support/home/en-in/product-support/product/alienware-aurora-r10-desktop/drivers.
I want Cortanna removed from my system
^^ Kindly refer: https://www.kapilarya.com/how-to-completely-disable-cortana-in-windows-10.
So what happened is that I lost my admin rights because I forgot my password and the only other account there is is guest. I have tried to do one of the getting admin rights by using a hard drive and changing utilman.exe to cmd but I do not have a hard drive. I also do not want do get all of my files removed. All I want is to be able to access my admin account. It can be by making a new account that is admin (which I would prefer for personal reasons), without getting rid of any data that is stored on my system. I do not want to pay for anything.
^^ Kindly refer this fix: https://www.kapilarya.com/fix-lost-administrative-rights-in-windows-10.
Hello Kapil,
Can you help me to fix the below error on Windows 10 (1909 or 2004 or 20H2 or 21H1). After booting up laptop, the error appears without showing Windows login screen (where we type our windows username/password).
“Error initializing login process
Initialization of the interactive login process failed.
Login process initialization error.
initialization of the interactive login process failed.”
I tried SFCSCAN and boot from a windows 10 USB media but didn’t help.
At the moment, rebooting the laptop with hard press of power button will help to pass through this error and show windows login screen but not always. So we may need to repeat again and again to pass through this error.
Please help
^^ Please refer this fix: https://www.kapilarya.com/fix-sign-in-process-initialization-failure-in-windows-10.
For another issue, perform clean boot: https://www.kapilarya.com/how-to-perform-clean-boot-in-windows-10.
Another problem with latest windows 10 updates is that printing is very slow and fails sometime.
Hello Kapil ,
Can you help me in this problem when I try to activate Win 10 Home on my laptop it gives me error code 0xC004F012 (In Activation Settings) and I tried to change the product key it gives error code 0xc0000022.
– I Checked Software Protection Service it was stopped and startup type (Automatic-Delayed Start) , when I tried to start the service it gives me (Error 5 Access is denied) and I’m the administrator .
-I Reset My Laptop and still the issue persists
-I Take Ownership of sppsvc folder and it’s registry keys and still not working
^^ Run Activation troubleshooter, see if it helps: https://www.kapilarya.com/how-to-use-the-windows-10-activation-troubleshooter
Hi Kapil
Having a problem with my windows update
Cannot install the new Windows 11 cumulative update
Shows Install error – 0x800f0831
Maybe can u help me?
Thank u
TheWardenX
^^ Have you tried Windows Update troubleshooter? If yes, did it reported back any issue?
im trying to install the win11 beta channel update but while downloading the update it used to go to like 11% and then suddenly go 100% and then stuck
^^ Run Windows Update troubleshooter, let me know what it reports.
Hello Kapil, I hope you can help me. I came home to find my Win 10 PC in a hung state, upon restarting I received a BSOD.
My PC proceeded into WinRE and no matter which option I chose (uninstall update/fix startup issues/reset PC/etc.) every single option failed – with the exception of system restore, which then subsequently failed with an error code of 0x80070091 (Source: AppxStaging). This seemed to be a common WindowsApps error so I followed the instructions from Step 2 provided here:
Upon completing those steps, System Restore no longer allowed me to select any of the restore points (hidden or otherwise), giving a status of: You must enable system protection on this drive (for Local Disk (C:) System).
I attempted the fix given here:
answers.microsoft.com/en-us/windows/forum/all/system-restore-error-0x80070091/cedb6d6a-a3cf-4917-a6c0-a1544631adb6?page=16
But a) I can’t even boot into Safe Mode (it gives the same BSOD each time no matter which safe mode option I select)
And b) the fix in option 1 fails as soon as I enter:
WindowsApps /grant “%USERDOMAIN%\%USERNAME%”:(F) /t
With the following message:
No mapping between account names and security IDs was done.
Am I doing something wrong here?
I do not want to do a total wipe and clean install of windows as I cannot afford to lose the files on my machine.. is there ANY other way to get my PC back into a bootable state with all of my files intact?
Any help would be greatly appreciated and I thank you for taking the time to read my comment.
^^ Please refer: https://www.kapilarya.com/fix-no-mapping-between-account-names-and-security-ids-was-done.
Hi Kapil,
Thank you for your reply.
Unfortunately that doesn’t work, as I cannot even get into windows in the first place – I am stuck in an infinite loop of BSOD’s and WinRE environment. So the only thing I can use is the CMD prompt via WinRE (not in safe mode however, as not even that works via WinRE).
Literally nothing works – I have even tried booting from a Win 10 Pro CD and both the Repair and Install options fail at various points.
So I was trying the fix I mentioned in my previous post.
Is the fix you have suggested to be entered into CMD after the step where it gave me the error I mentioned?
Do you know much about One drive throttle error?
Hello Kapil Arya,
I’ve had an issue I’ve been facing for quite some time. I’m can print documents as a full document, but when I custom print documents, they ‘touch’ the spooler and are sent to the printer but the printer does not “receive” the file to print. This even happens when you attempt to custom print by using the Adobe PDF printing preset. I’ve tried deleting the profile and it works temporarily.
^^ Update printer drivers, and if possible, reinstall your printer. You can remove it using this guide: https://www.kapilarya.com/how-to-completely-uninstall-printer-in-windows-10.
since upgrading to Windows 10 pro, my camera is saying it can not be turned on? This affects windows hello function. when looking at device manager it has a hazard sign next to the camera saying its not properly installed?
^^ Please refer: https://www.kapilarya.com/fix-camera-not-working-in-windows-10.
good evening Kapil Arya can you help me please? I just downloaded and created the windows 11 media creation tool and tried to upgrade from windows 10 Pro x64 Edition Version 21H1Build operating system 19043.1266 to windows 11 but the wizard stops showing me the following message “it is not possible to determine if your pc is ready to continue installing windows 11. try restarting the installer” “there is a problem select retry if the problem persists contact microsoft support for assistance error code 0x80070002” my pc has all the software and hardware requirements to upgrade to windows 11 i also received the notification via windows update and i also used the microsoft integrity application to check compatibility but in any way i try to update installation assistant or Creating installation media o Downloading disk image (ISO) I always get the same error message I have already tried unsuccessfully to run the sfc / scannow check the check DISM.exe / Online / Cleanup-image / Restorehealth the check chkdsk / f / r uninstall kaspersky
my pc
Computer Type: PC/Desktop
System Manufacturer/Model Number: assembled
OS: windows 10 pro x64 build 21h1 build 19043.1266
CPU: OctalCore Intel Core i9-9900K, 4700 MHz (47 x 100)
Motherboard: Gigabyte Z390 Aorus Pro WiFi BIOS version : F11
Memory: 32704 MB (DDR4 SDRAM)
Graphics Card: Radeon RX 570 Series (4 GB)
Sound Card: Periferica audio Realtek ALC1220 @ Intel Cannon Point PCH – cAVS (Audio, Voice, Speech)
Hard Drives: 1.NVMe Sabrent (953 GB) 2.ST2000DM001-9YN164 (2 TB, 7200 RPM, SATA-III) 3.TOSHIBA DT01ACA100 (1 TB, 7200 RPM, SATA-III)
Browser: Chrome Build 94.0.4606.71 x64 bit
Antivirus: kaspersky total security 21.3.10.391(f)
I thank you in advance
^^ Disable your AV temporarily and disconnect external devices and then try performing upgrade.
hello sir,in my serives.msc windows update not present but windows update medic service is present so what i do,i tried in this way also
^^ Perform repair upgrade: https://www.kapilarya.com/how-to-repair-windows-10-using-in-place-upgrade.
If there any option to restrict svchost.exe……if it restrict it will cause any problem to my pc……..?
Will repair reinstall delete activation? Which mine is digital licence
^^ Nope.
Any ways to reinstall or restore missing or deleted services like security_health_services and WinDefend service. Deleted due to a malware attacke. Even I try to install in registry it automatically delete the files. Help me please
I have a server running Server 2003 which is connected via Hamachi to remote PC’s running XP. The XP machine has a HP1020 printer which has been created as a share on the network. This works just fine. We now have upgraded the remote machines to Windows 10. When I try and add the printer on the server, it sees the remote PC with its printer but in the adding process I get asked to a Username and password to access the printer so I cannot complete the setup. I have exhausted all options and hope someone can provide a working solution to the problem,
Good day,
I have a server running SBE edition 2003. Several remote PC’s are running on XP. The XP machines have printers which are shared on the network.
We are using Hamachi to link them to the server. We are in the process of changing the XP machines to Windows 10. When we try and create the shares we get “The credentials Supplied are Not Sufficent to access this Printer and the a pop up with USer and password appears. We cannot get past this point and have tried all the suggestions on the net. What are we not doing right?
Hello!
I was playing my typical game I usually plsy which is warzone but mid-gameplay my screen cut and hit me with a blue screen saying “stop code = CRITICAL_PROCESS_DIED” please let meknow if this can be fixed and/or if money will be involved thank you have a good night/day
My disk usage seems to be hard pegged to 100% almost all the time. I have gone through everything I can think of /read online when trying to resolve this but nothing seems to fix it at all. I desperately need some help!
disabled superfetch, reset virtual memory, disabling start up apps, registry edits, services disabled etc.
^^ If you’re on HDD, switching to SSD may help.
İ was having problem with my external hdd mbr. Somehow after i createt boot recovery media usb and booted with that, my operating system can not be reachable. İ tried solution of yours that diskpart and assign letter options but now i am having ‘’the active command can only be used on ficed mbr disks’’ error on command prompt. İ need to boot my comouter eith c operating system
I am having high CPU usage problem like most people. I have followed all your steps. Even after disabling all non-Microsoft services, my laptop shows more than 80% CPU usage. Whenever I open task manager, the CPU usage drops to 2-5% and everything becomes normal. My system is a ASUS TUF F15, 11th gen i9, 16GB RAM laptop. I am using SysGauge software to monitor my CPU usage currently. Because I can’t use task manager to monitor my CPU usage. As I told you, if I open task manager, the CPU usage comes down to 2-5%. Please help me to resolve this. I also want to know what exactly happens when I open my task manager. Why does the CPU usage drop to 2-5% when I open the task manager? If there is no way, please let me know how to keep the task manager open all the time. Because the task manager keeps closing after a few moments. Please help.
I would like to convert from Windows 11 back to windows 10
^^ Refer my community guide here: answers.microsoft.com/en-us/windows/forum/all/downgrade-from-windows-11-to-windows-10/84a2416d-ccfb-4d87-9eee-e1056591e91f
Hey Kapil! Thanks for all your content on Windows issues. The guides are very informative but I hit a snag with the 10016 Error. After granting full access permissions to both my registry keys for APPID & CLSID (15C20B67-12E7-4BB6-92BB-7AFF07997402 and 2593F8B9-4EAF-457C-B68A-50F6B8EA6B54). When I get to step 8 to find them in the Component Services window (Console Root > Components Services > My Computer > DCOM Config) they aren’t listed. What would be the cause of that? Thanks alot. Congrats on the Windows Insider MVP award!
I used the following guide https://www.kapilarya.com/fix-event-10016-error-the-application-specific-permission-settings-do-not-grant-local-activation-permission-in-windows-10
Follow up to the 10016 comment. I found the AppID registry key under the Name “PerAppRuntimeBroker” in Component Services——>DCOM Configuration and followed the rest of the steps. Hopefully overtime I get less of the errors. Also hope I did everything right. I think I did.
^^ Hope it is resolved!
My brightness is not working I cannot use the function keys. When i open settings there is not brightness tab at the top. The first option is night mode and there is no place to adjust brightness. When I click Windows +a, the brightness option is grayed out. Please help as the screen is very dark and I can barely see it.
^^ Try reinstalling the display driver first. Also refer: https://www.kapilarya.com/fix-cant-change-screen-brightness-in-windows-10.
Try#3
After a power failure windows connects to internet via MS Outlook or command ping but not with browser or apps like Teams or Discord
I tried all the reset recommendations but no luck. I’m writing this on my phone using the same network as my Windows machine.
Any suggestions ?
I watch your videos very interesting but what happens if you don’t know your password to your account and what can you do please help me with that
I am at the end of the road. Ever since I started getting error code 0x80070005 when trying to download a new app. I have tried just about every possible solution there is especially ones that either it says guaranteed fix or they have told me it will fix my issue, yet I am still with the issue. I don’t how I got to this forum but I read on and followed the sfc/scannow command and this was one of those thtat it mentioned that after the error code would be gone but not the case with my stubborn hardheaded Windows 10 Pro computer. Restore is out not an option whatsoever since I would need to have a point going back to the first week of May which is when the error code started showing up. And since I have forced updated windows utilizing the windows update tool with the iso option. And still windows store has not been fixed. I am not going to put what i have done just give me some solutions and if it is something i’;ve done i’ll state it then.
^^ Try re-registering Store: https://www.kapilarya.com/how-to-re-register-store-app-in-windows-10.
I have a VPN connection that has always worked great. Suddenly it started having problems. When I would disconnect I would lose all internet and would have to reboot to get internet back. I did a network reset and that solved the problem. However, now I can connect without issue, but when I disconnect from the VPN I can no longer re-connect without a reboot. Very frustrating when I have to reboot each time I need to reconnect. Looking for suggestions. Thank you.
^^ Recheck the VPN settings.
My laptop doesnt start. It says to set your pin and when i do that , again it says something went wrong amd restarts again. Please help
^^ Refer: https://www.kapilarya.com/fix-something-went-wrong-and-your-pin-isnt-available-in-windows-11.
The command prompt closes instantly when it is opened .I am running a windows11 home. I tried the sfc scan but it doesn’t work. Can you please suggest a solution?
^^ Try repair upgrade: https://www.kapilarya.com/how-to-perform-repair-upgrade-in-windows-11
Hi I am unable to get win 10 usb “installation media” to load. I have a ~4 year old Win 10 desktop. Never a problem. Have kept WIN 10 updated on it. Suddenly last week after an NVIDIA driver update I received a BSOD and a blue “trying to fix… and then nothing for some time. I powered off the machine and it would not reboot. After doing some reading and determining that I needed it, I (using an HP laptop) went to the “Create installation media for Windows” page and created a USB stick. I got into the bios and changed the boot order to first for the USB stick and tried to boot it, I got automatic repair statement and circling dots (the circle of wait?) for several hours but nothing else.
I tested the USB stick on the HP laptop. It worked perfectly and showed the screen I expected to see. After more reading, I decided to set BIOS settings to default. I have never updated the BIOS or ever gotten into it before – system has never had a problem. I did move the USB to the first boot position again. I also confirmed that fast boot and secure boot were disabled.
This time I got a “hit any key to boot from…” and then for a second or two I got the blue 4 pane window logo and then that disappeared back to the circling dots.
According to this reference: learn.microsoft.com/en-us/windows/client-management/advanced-troubleshooting-boot-problems
I am getting past the BIOS phase because I can turn on and off the NUMLOCK key light during bootup and the HD is running.
FWIW, the computer normally boots from a 250 G SSD. It also has a 500 G SSD and a 2T storage HD
What am i missing? Thanks.
Update – I was able to launch Windows installation tool after downloading RUFUS and creating an ISO USB with that tool. No clue as to why that worked.
I got to the command prompt (but unlike your video, I was not prompted for my password or other logon credentials). I successfully executed the two commands
Bootrec /Fixmbr
Bootrec /Rebuildbcd
I tried Bootrec /Fixboot but I got an access denied
I choose to power off the computer, remove the usb, I booted into the bios and reset the boot order to the normal Windows partition on C: . After that the circling dots returned and Windows did not load.
Recommendations on what to do next?
Thanks
^^ Boot from installation media or recovery environment, if you’ve any restore point created before this problem, try using them.
Hello, recently I’ve updated my Windows 11 laptop to update 22H2, and after that, I am not getting a signal from every wifi network. My computer can connect to them, but doesn’t get a signal from the said network. Its not a problem with my wifi, every other device connected to it is working fine. I’ve tried my phone’s hotspot on my laptop, (which is working), and didn’t work. I’ve followed a previous article on this website about the issue I am having (https://www.kapilarya.com/fix-wifi-not-working-in-windows-11), but every step didn’t work. Except fix 6, the command didn’t work. I’ve tried Windows troubleshooting, I’ve tried doing a network reset, and none worked. I would really appreciated help here. Thank you!
^^ It seems you need the updated network driver for 22H2 update. Check with your device manufacturer’s website.
^ Alright, but how do I install it/update it?
Some more info, I have Intel(R) Dual Band Wireless-AC 8265. I think the right downloads are at intel.com/content/www/us/en/products/sku/94150/intel-dual-band-wirelessac-8265/downloads.html , but which one should I use? And I figured out how to update it I just need to download the right update.
Kapil, I am still unable to boot to Windows. Additional research leads me to believe that a additional HDD in my desktop has failed and that has somehow impacted the SSD that Windows is on. I am going to remove the additional HDD and see if that resolves the boot issue. Hopefully I can recover the HDD if that is the case.
my onedrive is shown view-only after my sister tried to delete onedrive from another device. I use onedrive for business .please help me
This weekend I discovered that 5 years of stored passwords on Goggle are gone. I tried all the suggested fixes with no luck. Is there a way to recover these missing passwords? It appears to be a coomon problem for Windows 10 users.
Hi! I tried downloading the refresh windows tool to fix resetting problems but there was an error. The error code is 0x80072F6 – 0x20016. Please help
I need to reinstall Windows 10 on my laptop, I’m trying to by Command Prompt which asks for Microsoft account password but when I try to access to my Microsoft account it says incorrect password.
Any idea how bypass that so I don’t have to login to it, only problem is that I’m on holiday so I don’t have any hardware (usb stick or CD) to reinstall windows with.
Is it manageable from BIOS ? If yes so, how? Thanks for your help/tips
^^ Try this: https://www.kapilarya.com/reinstall-or-reset-windows-10-using-the-cloud.
(Windows 10) – When I either select Restart or press the Restart button the PC goes through the first stages of restarting but never closes down and hangs with a black screen.
I then have to hold the start button down to close down the pc and then press the start button to complete the process. Grateful for any help.
Hi there,
I have bought a HP Envy product in August 2019 and also a key for the PRO version of Windows 10 HOme. Unfortunately though, I’d lost this key then and lately have found it again. I wanted to install it then , but the message I get is something that it’s not recommendable as the version of the Windows 10 now are totally different from in 2019. My question is now whether it is possible, and if it is, even worthwhile to delete all the newer versions of the Windows 10 in order to install the Pro version of it, and have the free upgrade to Windows 11 Pro then?
Hello I have an problem with my internet. I installed some apps then I used them and my network didn’t work after that, then I reseted the network on my laptop now the troubleshooter says that my ethernet and wifi does not have valid ip, I tried your helps but when I entered ipconfig /renew it says some problems with dhcp client, I tried changing dhcp client in services client but it was automatic already, please help me🙏🏻
^^ Reinstall or update your network driver.
How I can reinstall it ? I tried to Uninstall it in device manager but that didn’t worked
I can’t sign in any of microsoft app with my school email. I kept getting “you can’t access this right now” How can I sign in? How can I fix this??
Hi My laptop is Dell Inspiron 1750 and have a windows 10 Pro installed.
Since 2 days, suddenly the airplone mode is turned on and the audio also is disabled.
I have gone through the 2 fixes that you proposed but in the Fix 2 methos, reaching Step 4, the RadioEnable does not appear after clicking Find.
What can i do?
Thanks.
^^ Suggest you to perform Network Reset once: https://www.kapilarya.com/how-to-reset-network-settings-to-default-in-windows-10.
Hello I am using Windows 11 latest software and all driver updated. but from last sometimes my Wi-Fi driver getting disable frequently automatically and every time i need to uninstall Wi-Fi driver(intel wifi 6 AX201) and reinstall it and then again it works for 1-2 days and again issue occurs. I tried troubleshooting and asked to laptop manufacturer support, and they say you have to reset your laptop. Any solution except resetting?
^^ Instead of full reset, you can make Network Reset: https://www.kapilarya.com/how-to-reset-network-in-windows-11.
My Windows 10 Home laptop is running Version 1909 (OS Build 19363.1440). I bought it used and reset it with the Reset this PC process.
I thought all was well until I kept getting messages that my OS had reached end of life and I had to update it. As many times as I have run Windows Update, it fails to install “Feature update to Windows 10, version 22H2”.
I found your website and followed it to the Microsoft Update Catalog, then searched for “Feature update to Windows 10, version 22H2”. That brought me a list of 12 search results. Some have the same KB number, others are different. How do I choose which ones to install, and in what order?
I would like to update to 22H2 so that I can keep using the laptop.
Thank you.
Hello Kapil, I have a question regarding the issue I am facing, The Local administrator gets removed or revoked after reboot. I am trying to add an account to the administrator group make changes as admin and then reboot after that the account does not show up in the admin group. Iam trying to troubleshoot but no use, Its on my client machine and not my personal one.
hi, i buy a debloat service online. after they do debloat things my start menu and search bar not working. do u know any fix for this, really appreciate it
^^ You might need to consult with the debloat service in this case as they should be able to share what things they tried. Additionally you can refer: https://www.kapilarya.com/re-register-start-menu-windows-10.
Utilized laplink safe erase. After eight plus days of running the highest security erase program, it still seemed that items were left on my desktop. When you boot up the system, my complete name comes up on the sign-on screen. As I may recycle this desktop, I would like it to be as clean as possible…thus, I did not trust that safe erase removed everything that it should if my name for the sign-on screen still showed. I was able to look around the system at various files and started to remove these. I did not open any files…perhaps these were empty…but, I didn’t like the fact that file names still existed. (I am the victim of bank and credit card fraud…so, I trust nothing.) Well, I guess I may have tried to delete too much.
When the system is booted up, the sign-on screen with my complete name still appears. Yet, the error that User profile could not be loaded now appears.
I have rebooted the system numerous times in safe mode, selected various ‘fix’ methods available yet nothing more has changed.
***Is there a way to boot up this desktop, remove my name from sign-on screen, and ensure that whatever other files should/could be deleted are in fact GONE???
I did a BIOS update using Q-Flash on my B560 BS3H AC motherboard and now nothing in the PC turns on and I’m not sure what to do. I’ve already tried to clear the CMOS by removing the battery and using the jumper.
New laptop during initial set up when I get to create PIN it simply gives me a rotating circle and will go no further in initial set up Any ideas
Hello, I went to (https://www.kapilarya.com/fix-lost-administrative-rights-in-windows-10) and at the 5th instruction my computer said it couldnt run SAM, as the file is in use.. What am I supposed to do if I can’t run it?
My 12 year son changed pc name and i don’t know email from Microsoft said asked to block administrator account, I’m seriously need of my data and internet explorer saved password, I’ll be very grateful if you help me out.
^^ That could be a spam email, as Microsoft doesn’t email you when changing system name. Changing system name won’t affect your data.
My Pc stuck on airplane mode and it turns grey . I tried all tricks to turn off airplane mode but not a single one works here. I tried your trick too mentioned in this page.
Kindly help me to resolve this matter.
I have tried all the posted fixes to get an email client working in W10 but nothing works. I now have Thunderbird 32 bit installed and it works as it should but I can’t send a pdf from the software by email without getting the dreaded message ” no email client is installed”
I don’t like windows 11. It automatically installed Al which I neither need or want on my computer or windows. I want windows 10. I will have to make a clean install. What do I do with windows 11? Awfully hard to get answers that help me.
^^ In that case, you need to perform clean install for Windows 10: https://www.kapilarya.com/how-to-make-clean-install-of-windows-10.
For improved security, only allow Windows Hello sign-in for Microsoft accounts on this device” Missing in settings
After opening Setting, Accounts, sign-in options
I have
Facial
Fingerprint
Pin
Security Key
Password
Picture
THEN,
under Additional settings
If you have been away…
Dynamic lock
Automatically save my restaraable apps
Show accounts details
Use my sign-in info to automatically finish setting up….
and that’s it. Don’t know what happened to Allow/disallow Hello setting
^^ Make sure you’re on local account and not Microsoft account.
I have tried to reinstall my windows 11 security to no avail I am not technical at all 1st base i am terrified that someone will get into my computer and use my information. I cannot follow the instructions at all its like a different language i am really at the end of my tether can anyone tell me where i can find some one who could do it for me i have tried all on Microsoft but this is over a month i have tried please help me.